Virtual catalog
-
Bearings
- Rolling bearing parts and accessories
- Inner ring
- FFor solid needle roller bearings, type FIR (NSK)
- For solid needle roller bearings, type IR (NSK), inch size
- For drawn cup needle roller bearings, type FIR (NSK)
- For drawn cup needle roller bearings, type IR (NSK), inch size
- Inch size
- Inch size, without lubrication hole
- Ground, increased tolerances
- Precision machined
- Precision machined, with lubrication hole
- Series LRBZ (IKO), inch
- Series LRTZ (IKO)
- Sleeves
- Adapter
- Withdrawal
- Shaft nuts
- Precision locknuts
- Retaining brackets
- Tab washers
- Rolling elements
- Needle rollers
- INA production
- SKF production
- Axial bearing washers
- Housing locating washers GS
- Series F/FC (INA)
- Type AS, suitable for AXK AND K811..
- Type FTRA (NSK), suitable for FNTA..
- Type FTRB (NSK), suitable for FNTA..
- Type FTRC (NSK), suitable for FNTA..
- Type FTRD (NSK), suitable for FNTA..
- Type FTRE (NSK), suitable for FNTA..
- Type TRA (NSK), suitable for NTA, NTC.., inch size
- Type TRB (NSK), suitable for NTA, NTC.., inch size
- Type TRC (NSK), suitable for NTA, NTC.., inch size
- Type TRD (NSK), suitable for NTA, NTC.., inch size
- Type TRE (NSK), suitable for NTA, NTC.., inch size
- Type TWA (INA), suitable for TC..
- Type TWB (INA), suitable for TC..
- Type TWC (INA), suitable for TC..
- Type TWD (INA), suitable for TC..
- Shaft locating washers WS
- Bearing washers LS, suitable for AXK AND K811..
- Special axial bearing washers
- Series F (INA)
- Locknuts
- Combined
- Needle roller/angular contact ball bearings
- Double direction axial component
- Single direction axial component
- Needle roller/thrust cylindrical roller
- Double direction
- Double direction, for screw mounting
- Double direction, for screw mounting, long shaft locating washer
- Double direction, long shaft locating washer
- Thrust component, single direction, without end cap, for oil lubrication
- Thrust component, single direction, without end cap, for oil lubrication, with an inner ring
- Thrust component, single direction, with end cap, for grease lubrication
- Thrust component, single direction, with end cap, for grease lubrication, with an inner ring
- Needle roller/thrust rolling bearings
- Full complement thrust bearing
- Full complement thrust bearing, with end cap
- Thrust bearing with a cage
- Thrust bearing with a cage, with an inner ring
- Thrust bearing with a cage, with an inner ring, with end cap
- Thrust bearing with a cage, with end cap
- Bearing cross reference, interchange tables
- GPZ-ISO/ANSI
- TORRINGTON-KOYO
- Bearings for automative IRB
- Clutch release
- Double row angular contact ball bearing for hub
- Double row ball bearings for hub
- Automotive spare parts BREDA-SKF-INA
- TIMKEN sets
- Single row ball bearing for hub
- ABMA-SKF bearings
- CARTER bearings
- ENDURO bearings
- FAG bearings (part 1)
- FAG bearings (part 2)
- FAG bearings (part 3)
- FAG bearings (part 4)
- FAG bearings (part 5)
- HEIM bearings
- McGill bearings
- MRC bearings
- MRC-ABMA bearings
- PFI bearings
- THE GENERAL bearings
- Bearings for agricultural applications (part 1)
- Bearings for agricultural applications (part 2)
- Bearings for agricultural applications TIMKEN-FAFNIR
- Bearings and bearing units (part 1)
- Bearings and bearing units FKL
- Bearings and bearing units PEER
- Double row tapered roller bearings for hub
- Single row tapered roller bearings for hub
- Series VKBA SKF
- Hub unit
- HUB UNIT DAC TYPE
- Freewheel
- Self-contained freewheels
- DC type, centered by plain bearings for low rotational speeds and sealed using shield protected O Rings
- Roller type freewheels, using two 160.. series bearings, require oil lubrication
- Roller type freewheels, using two 160.. series bearings, require oil lubrication, keyway on the outside diameter
- Roller type freewheels, using two 160.. series bearings, require oil lubrication, keyway on the outside diameter, with flange type 5,6
- Roller type freewheels, using two 160.. series bearings, require oil lubrication, through holes for mounting
- Roller type freewheels, using two 160.. series bearings, require oil lubrication, through holes for mounting, keyway on the outside diameter
- Roller type freewheels, using two 160.. series bearings, require oil lubrication, with flange type 1,2
- Roller type freewheels, using two 160.. series bearings, require oil lubrication, with flange type 2,3
- Roller type freewheels, using two 160.. series bearings, require oil lubrication, with flange type 2,7
- Roller type freewheels, using two 160.. series bearings, require oil lubrication, with flange type 3,4
- Сentered by plain bearings for low rotational speeds, metallic labyrinth seals
- Built-in freewheels
- Bearing supported roller type freewheel without any sealing, d (8..20)
- Bearing supported roller type freewheel without any sealing, d (>25)
- Nominal outside dimensions are the same as series 62.. ball bearings
- Nominal outside dimensions are the same as series 63.. ball bearings
- Wide serie
- Freewheel cage without inner and outer races
- Drawn cup roller clutches, without bearing arrangement
- Plastic pressure springs, without knurling
- Plastic pressure springs, with knurling
- Steel springs, without knurling
- Steel springs, with knurling
- Drawn cup roller clutches, with bearing arrangement
- Plastic pressure springs, without knurling
- Plastic pressure springs, with knurling
- Steel springs, without knurling
- Steel springs, with knurling
- Combined bearing/freewheel
- Integral bearing based on series 62, 60
- Open
- With seals 2RS
- Keyway on both the inner and outer race
- Keyway on the inner race
- Keyway on the inner race, with seals 2RS
- Centrifugal lift-off sprags freewheels
- Built-in freewheels
- With the inner race rotating
- Slewing bearings
- CPM production
- Type A
- Type B
- Plain bearings
- Bushings, thrust washers and strips
- Bushings
- Without flange
- Solid bronze (SKF)
- PTFE polyamide (SKF)
- Sintered bronze (SKF)
- Filament wound (SKF)
- Low-maintenance, with steel backing and lubrication pockets (INA)
- Maintenance-free, POM composite (SKF)
- Maintenance-free, POM composite, inch size (SKF)
- Maintenance-free, PTFE composite (SKF)
- Maintenance-free, PTFE composite, inch size (SKF)
- Maintenance-free, with bronze backing (INA)
- Maintenance-free, with steel backing (INA)
- Maintenance-free, with steel backing, inch size (INA)
- Wrapped bronze (SKF)
- Cylindrical plain bushes, wound, with ELGOTEX, maintenance-free, wear-resistant (INA)
- Cylindrical plain bushes, maintenance-free, to DIN ISO 4379 (INA)
- Flanged
- Solid bronze (SKF)
- PTFE polyamide (SKF)
- Sintered bronze (SKF)
- Maintenance-free, PTFE composite (SKF)
- Maintenance-free, with bronze backing (INA)
- Maintenance-free, with steel backing (INA)
- Wrapped bronze (SKF)
- Strips
- Low-maintenance, with steel backing and lubrication pockets (INA)
- Maintenance-free, POM composite (SKF)
- Maintenance-free, PTFE composite (SKF)
- Maintenance-free, with steel backing (INA)
- Thrust washers
- Low-maintenance, with steel backing and lubrication pockets (INA)
- Maintenance-free, POM composite (SKF)
- Maintenance-free, PTFE composite (SKF)
- Maintenance-free, with bronze backing (INA)
- Maintenance-free, with steel backing (INA)
- Spherical plain bearings and rod ends
- Rod ends
- Hydraulic
- Requiring maintenance, with circular welding face, open design, DIN ISO 12240-4, series GK..-DO (INA)
- Requiring maintenance, with rectangular welding face, open design, series GF..-DO (INA)
- Requiring maintenance, with rectangular welding face, open design, series SCF..ES (SKF)
- Requiring maintenance, with thread clamping device, open design, left hand thread, DIN 24338, ISO 6982, series GIHNLK..-LO (INA), d≤50 mm
- Requiring maintenance, with thread clamping device, open design, left hand thread, DIN 24338, ISO 6982, series GIHNLK..-LO (INA), d≥63 mm
- Requiring maintenance, with thread clamping device, open design, left hand thread, series GIHLK..-DO (INA), d≤50 mm
- Requiring maintenance, with thread clamping device, open design, left hand thread, series GIHLK..-DO (INA), d≥60 mm
- Requiring maintenance, with thread clamping device, open design, left hand thread, series SILJ..ES, SILQG..ES (SKF)
- Requiring maintenance, with thread clamping device, open design, left hand thread, series SILR..ES (SKF)
- Requiring maintenance, with thread clamping device, open design, right hand thread, DIN 24338, ISO 6982, series GIHNRK..-LO (INA), d≤50 mm
- Requiring maintenance, with thread clamping device, open design, right hand thread, DIN 24338, ISO 6982, series GIHNRK..-LO (INA), d≥63 mm
- Requiring maintenance, with thread clamping device, open design, right hand thread, series GIHRK..-DO (INA), d≤50 mm
- Requiring maintenance, with thread clamping device, open design, right hand thread, series GIHRK..-DO (INA), d≥60 mm
- Requiring maintenance, with thread clamping device, open design, right hand thread, series SIJ..ES, SIQG..ES (SKF)
- Requiring maintenance, with thread clamping device, open design, right hand thread, series SIR..ES (SKF)
- Maintenance free
- Contact seals on both side, series G...-2RS (FLURO)
- With threaded bolt, for use as a right angle connector, G...-BO (FLURO)
- With internal thread, with lip seals or high performance seals, left hand thread, series GIL..-UK-2RS (INA)
- With internal thread, with lip seals or high performance seals, right hand thread, series GIR..-UK-2RS (INA)
- With internal thread, corrosion-resistant, open design, left hand thread, series GIKSL..-PS, GIKPSL..-PS (INA)
- With internal thread, corrosion-resistant, open design, right hand thread, series GIKSR..-PS, GIKPSR..-PS (INA)
- With internal thread, open design, left hand thread, stainless steel, series GILRSW (FLURO)
- With internal thread, open design, left hand thread, series GIL..-UK (INA)
- With internal thread, open design, left hand thread, series GILO (FLURO)
- With internal thread, open design, left hand thread, series GILOW (FLURO)
- With internal thread, open design, left hand thread, series GILSW (FLURO)
- With internal thread, open design, left hand thread, series GILXSW (FLURO)
- With internal thread, open design, left hand thread, series PHS..ECL, GIKL..-PW, SILKB
- With internal thread, open design, left hand thread, series SIL(A)..TXE-2LS (SKF)
- With internal thread, open design, left hand thread, series SIL..C (SKF)
- With internal thread, open design, right hand thread, stainless steel, series GIRSW (FLURO)
- With internal thread, open design, right hand thread, series GIO (FLURO)
- With internal thread, open design, right hand thread, series GIOW (FLURO)
- With internal thread, open design, right hand thread, series GIR..-UK (INA)
- With internal thread, open design, right hand thread, series GISW (FLURO)
- With internal thread, open design, right hand thread, series GIXSW (FLURO)
- With internal thread, open design, right hand thread, series PHS..EC, GIKR..-PW, GIKPR..-PW, SIKB
- With internal thread, open design, right hand thread, series SI(A)..TXE-2LS (SKF)
- With internal thread, open design, right hand thread, series SI..C (SKF)
- With external thread, with lip seals or high performance seals, left hand thread, series GAL..-UK-2RS (INA)
- With external thread, with lip seals or high performance seals, right hand thread, series GAR..-UK-2RS (INA)
- With external thread, open design, left hand thread, corrosion-resistant, series GAKSL..-PS (INA)
- With external thread, open design, left hand thread, stainless steel, series GALRSW (FLURO)
- With external thread, open design, left hand thread, series GAL..-UK (INA)
- With external thread, open design, left hand thread, series GALO (FLURO)
- With external thread, open design, left hand thread, series GALOW (FLURO)
- With external thread, open design, left hand thread, series GALSW (FLURO)
- With external thread, open design, left hand thread, series GALXSW (FLURO)
- With internal thread, open design, left hand thread, series POS..ECL, GAKL..PW, SALKB
- With external thread, open design, left hand thread, series SAL(A)..TXE-2LS
- With external thread, open design, left hand thread, series SAL..C (SKF)
- With external thread, open design, right hand thread, corrosion-resistant, series GAKSR..-PS (INA)
- With external thread, open design, right hand thread, stainless steel, series GARSW (FLURO)
- With external thread, open design, right hand thread, series GAO (FLURO)
- With external thread, open design, right hand thread, series GAOW (FLURO)
- With external thread, open design, right hand thread, series GAR..-UK (INA)
- With external thread, open design, right hand thread, series GASW (FLURO)
- With external thread, open design, right hand thread, series GAXSW (FLURO)
- With internal thread, open design, right hand thread, series POS..EC, GAKR..PW, SAKB
- With external thread, open design, right hand thread, series SA(A)..TXE-2LS
- With external thread, open design, right hand thread, series SA..C (SKF)
- Requiring maintenance
- For pneumatic cylinders, CETOP RP 103 P, series GI…-CETOP (FLURO)
- With internal thread, with lip seals or high performance seals, left hand thread, series GIL..-DO-2RS (INA)
- With internal thread, with lip seals or high performance seals, left hand thread, series SIL(A)..ES-2RS (SKF)
- With internal thread, with lip seals or high performance seals, right hand thread, series GIR..-DO-2RS (INA)
- With internal thread, with lip seals or high performance seals, right hand thread, series SI(A)..ES-2RS (SKF)
- With internal thread, open design, right hand thread, inch, series PHSB..L
- With internal thread, open design, left hand thread, stainless steel, series GILRS (FLURO)
- With internal thread, open design, left hand thread, series GIKL..PB, SILKAC, PHS..L
- With internal thread, open design, left hand thread, series GIL (FLURO)
- With internal thread, open design, left hand thread, series GIL..-DO (INA)
- With internal thread, open design, left hand thread, series GILS (FLURO)
- With internal thread, open design, left hand thread, series GILXS (FLURO)
- With internal thread, open design, left hand thread, series PHSA..L (IKO)
- With internal thread, open design, left hand thread, series SIL..E(S) (SKF)
- With internal thread, open design, right hand thread, inch, series PHSB, HF, HV, MV, TR, RF
- With internal thread, open design, right hand thread, stainless steel, series GIRS (FLURO)
- With internal thread, open design, right hand thread, series GI (FLURO)
- With internal thread, open design, right hand thread, series GIR..-DO (INA)
- With internal thread, open design, right hand thread, series GIS (FLURO)
- With internal thread, open design, right hand thread, series GIXS (FLURO)
- With internal thread, open design, right hand thread, series PHSA (IKO)
- With internal thread, open design, right hand thread, series SI..E(S) (SKF)
- With external thread, with lip seals or high performance seals, left hand thread, series GAL..-DO-2RS (INA)
- With external thread, with lip seals or high performance seals, right hand thread, series GAR..-DO-2RS (INA)
- With internal thread, open design, left hand thread, inch, series POSB..L
- With external thread, open design, left hand thread, stainless steel, series GALRS (FLURO)
- With internal thread, open design, left hand thread, series GAKL..PB, SALKAC, POS..L
- With external thread, open design, left hand thread, series GAL (FLURO)
- With external thread, open design, left hand thread, series GAL..-DO (INA)
- With external thread, open design, left hand thread, series GALS (FLURO)
- With external thread, open design, left hand thread, series GALXS (FLURO)
- With external thread, open design, left hand thread, series SAL(A)..ES-2RS (SKF)
- With external thread, open design, left hand thread, series SAL..ES (SKF)
- With internal thread, open design, right hand thread, inch, series POSB, HM, VM, MM, TRE, RM
- With external thread, open design, right hand thread, stainless steel, series GARS (FLURO)
- With external thread, open design, right hand thread, series GA (FLURO)
- With internal thread, open design, right hand thread, series GAKR..PB, SAKAC, POS
- With external thread, open design, right hand thread, series GAR..-DO (INA)
- With external thread, open design, right hand thread, series GAS (FLURO)
- With external thread, open design, right hand thread, series GAXS (FLURO)
- With external thread, open design, right hand thread, series SA(A)..ES-2RS (SKF)
- With external thread, open design, right hand thread, series SA..ES (SKF)
- Angular contact spherical plain bearings
- Maintenance free
- Series GE..-SW, GAC..F, steel/PTFE FRP
- Requiring maintenance
- Series GE..-SX (FLURO)
- Series GE..-SX (INA)
- Radial spherical plain bearings
- Maintenance free
- Series GEC..FBAS (SKF), axially split, separable, steel/PTFE FRP
- Series GEH..C-2RS, GE..FW-2RS, contact seals on both side
- Series GEP..FS (SKF), radially split, separable, steel/PTFE FRP
- Series GEZ..TXA-2LS (SKF), triple-lip heavy-duty seal, inch size
- Series GEZ..TXE-2LS (SKF), triple-lip heavy-duty seal, inch size
- Large series GE..-DW (INA)
- Large series GE..-DW (INA), contact seals on both side
- Series GE..-FW (FLURO)
- Series GE..-FW-2RS (FLURO), contact seals on both side
- Series GE..-PW (INA)
- Series GE..C, GE..UK, GE..EC
- Series GE..C-2RS, GE..UK-2RS, GE..EC-2RS, сontact seals on both side
- Series GE..EC (FLURO)
- Series GE..EC-2RS (FLURO), contact seals on both side
- Series GE..EC-NIRO (FLURO), corrosion-resistant
- Series GE..TXA-2LS (SKF), triple-lip heavy-duty seal
- Series GE..TXE-2LS (SKF), triple-lip heavy-duty seal
- Series GE..TXG3A-2LS (SKF), triple-lip heavy-duty seal, stainless steel
- Series GE..TXG3E-2LS (SKF), triple-lip heavy-duty seal, stainless steel
- Series GE..TXGR (SKF), stainless steel
- Series GEC..TXA-2RS (SKF), сontact seals on both side, sliding surface hard chromium plated
- Series GEH..C, GE..FW
- Series GEH..TXA-2LS (SKF), triple-lip heavy-duty seal
- Series GEH..TXE-2LS (SKF), triple-lip heavy-duty seal
- Series GEH..TXG3A-2LS (SKF), triple-lip heavy-duty seal, stainless steel
- Series GEH..TXG3E-2LS (SKF), triple-lip heavy-duty seal, stainless steel
- Series GEZ..-C, contact seals on both side, inch size
- Series GLRSW (FLURO), corrosion-resistant
- Series GLXSW (FLURO)
- Series GXSW (FLURO)
- Requiring maintenance
- Series GEH..ES-2LS (SKF), triple-lip heavy-duty seal
- Series GEZ..ES-2RS, GE..ZO-2RS, SBB..2RS, Contact seals on both side, inch size
- Series GEZH..ES (SKF), inch size
- Series GEZH..ES-2LS (SKF), triple-lip heavy-duty seal, inch size
- Series GEZH..ES-2RS (SKF), contact seals on both side, inch size
- Series SB..A (IKO), steel-on-steel, outer ring is axially split at one point
- Series FSF (NSK)
- Series GE..-FO (FLURO)
- Series GE..-FO-2RS (FLURO), contact seals on both side
- Series GE..-HO (INA), contact seals on both side
- Series GE..-HO-2RS (FLURO), contact seals on both side
- Series GE..-LO
- Series GE..-PB (INA)
- Series GE..E (FLURO)
- Series GE..E-2RS (FLURO)
- Series GE..E/ES
- Series GE..ES-2LS (SKF), triple-lip heavy-duty seal
- Series GE..ES-2RS, contact seals on both side
- Series GEH..ES, GE..FO, GE..G(S)
- Series GEH..ES-2RS, GE..FO-2RS, GE..GS-2RS, contact seals on both side
- Series GEM..ES-2LS, triple-lip heavy-duty seal
- Series GEM..ES-2RS, contact seals on both side
- Series GEZ..-ES, contact seals on both side, inch size
- Series GEZ..ES, GE..ZO, SBB, inch size
- Series GEZ..ES-2LS (SKF), triple-lip heavy-duty seal, inch size
- Series GEZM..ES (SKF), inch size
- Series GEZM..ES-2RS (SKF), contact seals on both side, inch size
- Series GEZM..ES-2LS (SKF), triple-lip heavy-duty seal, inch size
- Series GL (FLURO)
- Series GLRS (FLURO), corrosion-resistant
- Series GLXS (FLURO)
- Series GXS (FLURO)
- Series PB
- Series SB (IKO), steel-on-steel, outer ring is axially split at two points, snap ring
- Series SF (NSK), inch size
- Thrust spherical plain bearings
- Maintenance free
- Series GE..-AW, GX..F, steel/PTFE FRP
- Requiring maintenance
- Series GE..-AX (FLURO)
- Series GE..-AX (INA)
- Roller bearings
- Needle
- Double row
- With machined rings without flanges, without an inner ring
- Metric
- With mallet-shaped roller, inch
- With mallet-shaped roller, lip seals on both side, inch
- With mallet-shaped roller, metric
- With machined rings without flanges, with an inner ring
- Metric
- With mallet-shaped roller, metric
- With machined rings with flanges, without an inner ring
- Metric
- Lip seals on both side, metric
- With machined rings with flanges, with an inner ring
- Metric
- Lip seals on both side, metric
- Needle roller and cage assemblies
- Metric
- Type FBN..W (NSK)
- Type FWF..W (NSK)
- Drawn cup
- Closed end, with cage, metric
- With cage, metric
- Single row
- With machined rings without flanges, without an inner ring
- Metric
- With machined rings without flanges, with an inner ring
- Metric
- With machined rings with flanges, without an inner ring
- Seals 2RS, inch size
- Inch
- Metric
- Seal on one side, heavy series, type HJ..RS (KOYO-TORRINGTON)
- Lip seals on both side, metric
- Lip seal RS on one side, metric
- Type RLM (NSK)
- With machined rings with flanges, with an inner ring
- Metric
- Lip seals on both side, metric
- Lip seal RS on one side, metric
- Type HJ..+IR.. (NSK), inch size
- Type LM (NSK)
- Needle roller and cage assemblies
- KOYO-TORRINGTON, inch size
- For large ends of connecting rods, type FWF..E (NSK)
- For small ends of connecting rods, type FBN..E (NSK)
- Metric
- Piston pin bearing, series KBK
- Crank pin bearing, series KZK
- Type FBN, FBNP (NSK)
- Type FWJ, FWF (NSK)
- Type WJ (NSK), inch size
- Type WJC, WJP (NSK), inch size
- Alignment needle roller bearings, without an inner ring
- Metric
- Alignment needle roller bearings with an inner ring
- Metric
- Drawn cup
- With open ends, with cage, type FJ, FJH, FJL (NSK)
- Full complement needle roller set, inch
- Full complement needle roller set, metric
- Full complement needle roller set, mechanically retained full complement shell, inch size
- With open ends, full complement needle roller set, miniature, type DD (NSK)
- With open ends, full complement needle roller set, miniature, type F (NSK)
- Full complement needle roller set, grease-retained, type Y, YH (NSK), inch size
- With open ends, full complement needle roller set, type F, FH, NF, NFH (NSK)
- Closed end, full complement needle roller set, miniature, type M, MH (NSK), inch size
- Closed end, full complement needle roller set, miniature, type MF (NSK)
- Closed end, full complement needle roller set, miniature, type MFY, DD (NSK)
- Closed end, full complement needle roller set, type CS, CSH (INA), mechanically retained full complement shell, inch size
- Closed end, full complement needle roller set, type CSN, CSNH (INA), inch size
- Closed end, full complement needle roller set, type M, MH (NSK), inch size
- Closed end, full complement needle roller set, type M-1, MH-1 (KOYO-TORRINGTON), mechanically retained full complement shell, inch size
- Closed end, full complement needle roller set, type MF, MFH, MNF (NSK)
- Closed end, with cage, inch
- Closed end, with cage, metric
- Closed end, with cage, metric, type MFJ, MFJH, MFJL (NSK)
- Closed end, with cage, miniature, type MFJ, MFJH, MFJL (NSK)
- Closed end, with cage, miniature, type MJ, MJH (NSK), inch size
- Closed end, with cage, lip seal P on one side, metric, type BCE, BCH (INA), inch size
- Closed end, with cage, lip seal RS on one side, metric
- Closed end, with cage, lip seal RS on one side, metric, type MFJT, MFJLT (NSK)
- Closed end, with cage, type MJ, MJH (NSK), inch size
- Open end, inch size, caged shell, one seal (KOYO-TORRINGTON)
- With cage, inch
- With cage, metric
- With open ends, with cage, miniature, type FJ, FJH, FJL (NSK)
- With open ends, with cage, miniature, type FJP (NSK)
- With cage, with open ends, miniature, type J, JH (NSK), inch size
- With cage, with open ends, miniature, type JP (NSK), inch size
- With cage, lip seals on both side, metric
- With cage, lip seal P on one side, type SCE, SCH (INA), inch size
- With cage, lip seal RS on one side, metric
- With cage, lip seal RS on one side, metric, type FJT, FJHT, FJLT (NSK)
- With cage, with open ends, lip seals on both side, type FJTT, FJHTT, FJLTT (NSK)
- With cage, with open ends, lip seals on both side, type JTT (KOYO-TORRINGTON), inch size
- With cage, with open ends, lip seals on both side, type SCE, SCH (INA), inch size
- With cage, with open ends, type J, JH (NSK), inch size
- With open ends, with cage, thin type, type DB (NSK)
- Yoke type track rollers
- Without axial guidance
- Without an inner ring
- Outer ring without ribs
- Outer ring without ribs, сontact seals on both side
- Outer ring without ribs, сontact seals on both side, cylindrical outer ring
- Outer ring without ribs, cylindrical outer ring
- With an inner ring
- Outer ring without ribs
- Outer ring without ribs, сontact seals on both side
- Outer ring without ribs, сontact seals on both side, type NAST
- Outer ring without ribs, сontact seals on both side, cylindrical outer ring
- Outer ring without ribs, сontact seals on both side, cylindrical outer ring, type NAST
- Outer ring without ribs, shields 2Z
- Outer ring without ribs, shields 2Z, cylindrical outer ring
- Outer ring without ribs, cylindrical outer ring
- With axial guidance
- Gap seals on both side
- Gap seals on both side, cylindrical outer ring
- Full complement needle roller set, gap seals on both sides
- Full complement needle roller set, gap seals on both sides, inch size
- Full complement needle roller set, gap seals on both sides, cylindrical outer ring
- Full complement needle roller set, gap seals on both sides, cylindrical outer ring, inch size
- Full complement needle roller set, sealing rings on both sides
- Full complement needle roller set, sealing rings on both sides, inch size
- Full complement needle roller set, sealing rings on both sides, cylindrical outer ring
- Full complement needle roller set, sealing rings on both sides, cylindrical outer ring, inch size
- Full complement needle roller set, with seal, with thrust washer, outer ring has a spherical outside surface, type FYCRS..R (NSK)
- Full complement needle roller set, with seal, with thrust washer, outer ring has a spherical outside surface, type YCRS..R (NSK), inch size
- Full complement needle roller set, with seal, with thrust washer, outer ring has a cylindrical outside surface, type FYCRS (NSK
- Full complement needle roller set, with seal, with thrust washer, outer ring has a cylindrical outside surface, type YCRS (NSK), inch size
- Full complement needle roller set, outer ring has a spherical outside surface, type FYCR..R (NSK)
- Full complement needle roller set, outer ring has a spherical outside surface, type YCR..R (NSK), inch size
- Full complement needle roller set, outer ring has a cylindrical outside surface, type FYCR (NSK)
- Full complement needle roller set, outer ring has a cylindrical outside surface, type YCR (NSK), inch size
- Sealing rings on both sides
- Sealing rings on both sides, cylindrical outer ring
- Full complement cylindrical roller set, lip seals on both sides
- Full complement cylindrical roller set, labyrinth seals on both sides
- Full complement cylindrical roller set, labyrinth seals on both sides, cylindrical outer ring
- Full complement roller set, central rib, shields on both sides
- Full complement roller set, central rib, sealing shields with lamellar ring on both sides
- Double row roller set, contact seals on both side, inch size
- Double row roller set, contact seals on both side, cylindrical outer ring, inch size
- With cage, with seal, with thrust washer, outer ring has a spherical outside surface, type FYCJS..R (NSK)
- With cage, with seal, with thrust washer, outer ring has a cylindrical outside surface, type FYCJS (NSK)
- With cage, outer ring has a spherical outside surface, type FYCJ..R (NSK)
- With cage, outer ring has a cylindrical outside surface, type FYCJ (NSK)
- Tapered
- Hermetic
- Integral, lip seal on one side
- Type TSL, seal duo face (TIMKEN)
- Double row
- O-arrangement, inch size, design 1 (FAG)
- O-arrangement, inch size, design 2 (FAG)
- O-arrangement, inch size, design 3 (FAG)
- O-arrangement, inch size, design 4 (FAG)
- O-arrangement, metric size, design 1 (FAG)
- O-arrangement, metric size, design 2 (FAG)
- For vertical rolls in universal roll stands, design 1 (FAG)
- For vertical rolls in universal roll stands, design 2 (FAG)
- For work rolls, design 1 (FAG)
- For work rolls, design 2 (FAG)
- For work rolls, design 3 (FAG)
- For loose fit on the roll neck, design 1 (FAG)
- For loose fit on the roll neck, design 2 (FAG)
- For loose fit on the roll neck, design 3 (FAG)
- With extended cones, design 1 (FAG)
- With extended cones, tapered bore (1:12), design 2 (FAG)
- Type INASW, non-adjustable double-row bearing, lubrication hole
- Type INASWE, non-adjustable double-row bearing, lubrication hole, extended back face rib
- Type TDI, double inner ring
- Type TDIIT, double inner ring, tapered inner bore
- Type TDO, double outer ring
- Type TDODC, double outer ring, groove with oil holes for lubrication, anti-rotational pin
- Type TDODC, double outer ring with hole for anti-rotational pin
- Type TNA, non-adjustable double-row bearing
- Type TNASW, non-adjustable double-row bearing, lubrication groove
- Type TNASWE, non-adjustable double-row bearing, lubrication groove, extended back face rib
- Thrust bearings, e.g. for oil film bearings, design 1 (FAG)
- Thrust bearings, e.g. for oil film bearings, design 2 (FAG)
- Thrust bearings, e.g. for oil film bearings, design 3 (FAG)
- Thrust bearings, e.g. for oil film bearings, design 4 (FAG)
- Thrust bearings, e.g. for oil film bearings, design 5 (FAG)
- Other type
- Single row
- Flange to cup (SKF)
- Cone
- Hub unit
- Inch size
- Light series KT (KAYDON)
- Metric
- Steering bearings
- Special
- Type TSF, flange to cup
- Type TSF, flange to cup (FERSA)
- Type TSU, set
- Single row, matched bearings
- Back-to-back (SKF)
- Tandem (SKF)
- Face-to-face
- Bearing unit
- Automative
- Double-row
- Bearing for wheel hub (Type A)
- Bearing for wheel hub (Type B)
- Bearing for wheel hub (Type C)
- Tapered roller bearing assembly
- Type 2S, two single-row assemblies with snap ring spacer
- Type 2TS-DM (O-mounting), two single row bearing, mounting inner ring, outer distance ring
- Type 2TS-IM (X-mounting), two single row bearing with inner and outer distance rings
- Type 2TS-TM, two single row bearing, tandem-mounting
- Type SR, SET-RIGHT TIMKEN, double-row, distance ring, standard clearance
- Precision
- GAMET plain cup, simple ring
- GAMET type C, flanged cup
- GAMET type G, double-row
- GAMET type H, double-row, flanged cup
- GAMET type P, constant preload
- High speed type TSMA
- Single-row type TS
- Single-row type TSF, flanged cup
- Type TSHR-"HYDRA-RIB" (TIMKEN), special outer ring used in hydra-rib bearing
- Thrust
- Full complement, with external holder
- Double acting, with spacer (FAG)
- For screw down mechanisms, design 1 (FAG)
- For screw down mechanisms, design 2 (FAG)
- For screw down mechanisms, design 3 (FAG)
- For screw down mechanisms, design 4 (FAG)
- Type TTHD, standard
- Type TTHDFL, stop ring
- Type TTSP, with external holder
- Type TTVS, self-aligning with stop rings
- Four row
- Inch size, design 1 (FAG)
- Inch size, design 2 (FAG)
- Inch size, design 3 (FAG)
- Inch size, design 4 (FAG)
- Metric size, design 1 (FAG)
- Metric size, design 2 (FAG)
- Metric size, design 3 (FAG)
- Metric size, design 4 (FAG)
- With extended cones (FAG)
- With integrated seals, design 1 (FAG)
- With integrated seals, design 2 (FAG)
- With integrated seals, design 3 (FAG)
- With integrated seals, design 4 (FAG)
- Stud type track rollers
- Heavy duty stud, hex socket, contact seals on both side, inch size
- Heavy duty stud, hex socket, contact seals on both side, cylindrical outer ring, inch size
- Roller, double row, hex socket, contact seals on both side, inch size
- Roller, double row, hex socket, contact seals on both side, cylindrical outer ring, inch size
- With axial guidance, full complement bearing, gap seal on both side
- With axial guidance, full complement bearing, gap seal on both side, inch size
- With axial guidance, full complement bearing, gap seal on both side, cylindrical outer ring
- With axial guidance, full complement bearing, gap seal on both side, cylindrical outer ring, inch size
- With axial guidance, full complement bearing, gap seal on both side, cylindrical outer ring, hex socket
- With axial guidance, full complement bearing, gap seal on both side, cylindrical outer ring, double hex hole
- With axial guidance, full complement bearing, gap seal on both side, cylindrical outer ring, hex socket, heavy duty, inch size
- With axial guidance, full complement bearing, gap seal on both side, cylindrical outer ring, hex socket, inch size
- With axial guidance, full complement bearing, gap seal on both side, hex socket
- With axial guidance, full complement bearing, gap seal on both side, double hex hole
- With axial guidance, full complement bearing, gap seal on both side, hex socket, heavy duty, inch size
- With axial guidance, full complement bearing, gap seal on both side, hex socket, inch size
- With axial guidance, full complement bearing, sealing rings on both sides
- With axial guidance, full complement bearing, sealing rings on both sides, inch size
- With axial guidance, full complement bearing, sealing rings on both sides, cylindrical outer ring
- With axial guidance, full complement bearing, sealing rings on both sides, cylindrical outer ring, inch size
- With axial guidance, full complement bearing, sealing rings on both sides, cylindrical outer ring
- With axial guidance, full complement bearing, sealing rings on both sides, cylindrical outer ring, double hex hole
- With axial guidance, full complement bearing, sealing rings on both sides, cylindrical outer ring, heavy duty, inch size
- With axial guidance, full complement bearing, sealing rings on both sides, cylindrical outer ring, hex socket, inch size
- With axial guidance, full complement bearing, sealing rings on both sides, hex socket
- With axial guidance, full complement bearing, sealing rings on both sides, double hex hole
- With axial guidance, full complement bearing, sealing rings on both sides, hex socket, heavy duty, inch size
- With axial guidance, full complement bearing, sealing rings on both sides, hex socket, inch size
- With axial guidance, full complement bearing, with seal, with thrust washer, outer ring has a spherical outside surface, type CRS..R (NSK), inch size
- With axial guidance, full complement bearing, with seal, with thrust washer, outer ring has a spherical outside surface, type FCRS..R (NSK)
- With axial guidance, full complement bearing, with seal, with thrust washer, outer ring has a cylindrical outside surface, type CRS (NSK), inch size
- With axial guidance, full complement bearing, with seal, with thrust washer, outer ring has a cylindrical outside surface, type FCRS (NSK)
- With axial guidance, full complement bearing, outer ring has a spherical outside surface, type CR..R (NSK), inch size
- With axial guidance, full complement bearing, outer ring has a spherical outside surface, type FCR..R (NSK)
- With axial guidance, full complement bearing, outer ring has a cylindrical outside surface, type CR (NSK), inch size
- With axial guidance, full complement bearing, outer ring has a cylindrical outside surface, type FCR (NSK)
- With axial guidance, gap seals on both side
- With axial guidance, gap seals on both side, inch size
- With axial guidance, gap seals on both side, stainless steel, hex hole
- With axial guidance, gap seals on both side, stainless thrust disk type, hex hole
- With axial guidance, gap seals on both side, centralized lubrication type
- With axial guidance, gap seals on both side, centralized lubrication type, cylindrical outer ring
- With axial guidance, gap seals on both side, thrust disk type, hex hole
- With axial guidance, gap seals on both side, cylindrical outer ring
- With axial guidance, gap seals on both side, cylindrical outer ring, inch size
- With axial guidance, gap seals on both side, cylindrical outer ring, stainless steel, hex hole
- With axial guidance, gap seals on both side, cylindrical outer ring, hex hole
- With axial guidance, gap seals on both side, cylindrical outer ring, double hex hole
- With axial guidance, gap seals on both side, cylindrical outer ring, hex hole, inch size
- With axial guidance, gap seals on both side, hex hole
- With axial guidance, gap seals on both side, double hex hole
- With axial guidance, gap seals on both side, hex hole, inch size
- With axial guidance, sealing rings on both sides
- With axial guidance, sealing rings on both sides, inch size
- With axial guidance, sealing rings on both sides, stainless steel, hex hole
- With axial guidance, sealing rings on both sides, stainless thrust disk type, hex hole
- With axial guidance, sealing rings on both sides, thermosetting solid-type lubricant C-Lube (IKO)
- With axial guidance, sealing rings on both sides, thrust disk type, hex hole
- With axial guidance, sealing rings on both sides, cylindrical outer ring
- With axial guidance, sealing rings on both sides, cylindrical outer ring, inch size
- With axial guidance, sealing rings on both sides, cylindrical outer ring, stainless steel, hex socket
- With axial guidance, sealing rings on both sides, cylindrical outer ring, hex socket
- With axial guidance, sealing rings on both sides, cylindrical outer ring, double hex hole
- With axial guidance, sealing rings on both sides, cylindrical outer ring, hex socket, inch size
- With axial guidance, sealing rings on both sides, hex socket
- With axial guidance, sealing rings on both sides, double hex hole
- With axial guidance, sealing rings on both sides, hex socket, inch size
- With axial guidance, full complement cylindrical roller set, lip seals on both sides
- With axial guidance, full complement cylindrical roller set, labyrinth seals on both sides
- With axial guidance, full complement cylindrical roller set, labyrinth seals on both sides, cylindrical outer ring
- With axial guidance, full complement cylindrical roller set, with eccentric collar, lip seals on both sides
- With axial guidance, full complement cylindrical roller set, with eccentric collar, labyrinth seals on both sides
- With axial guidance, full complement cylindrical roller set, with eccentric collar, labyrinth seals on both sides, cylindrical outer ring
- With axial guidance, with cage, with seal, with thrust washer, outer ring has a spherical outside surface, type FCJS..R (NSK)
- With axial guidance, with cage, with seal, with thrust washer, outer ring has a cylindrical outside surface, type FCJS (NSK)
- With axial guidance, with cage, outer ring has a spherical outside surface, type FCJ..R (NSK)
- With axial guidance, with cage, outer ring has a cylindrical outside surface, type FCJ (NSK)
- With axial guidance, with eccentric collar
- With axial guidance, with eccentric collar, sealing rings on both sides
- With axial guidance, with eccentric collar, sealing rings on both sides, cylindrical outer ring
- With axial guidance, with eccentric collar, sealing rings on both sides, cylindrical outer ring, hex socket
- With axial guidance, with eccentric collar, sealing rings on both sides, hex socket
- With axial guidance, with eccentric collar, cylindrical outer ring
- With axial guidance, with eccentric collar, cylindrical outer ring, hex socket
- With axial guidance, with eccentric collar, hex socket
- With axial guidance, eccentric stud, full complement bearing, gap seal on both side
- With axial guidance, eccentric stud, full complement bearing, gap seal on both side, cylindrical outer ring
- With axial guidance, eccentric stud, full complement bearing, gap seal on both side, cylindrical outer ring, hex socket
- With axial guidance, eccentric stud, full complement bearing, gap seal on both side, hex socket
- With axial guidance, eccentric stud, full complement bearing, gap seal on both side, gap seal on both side
- With axial guidance, eccentric stud, full complement bearing, gap seal on both side, gap seal on both side, cylindrical outer ring
- With axial guidance, eccentric stud, full complement bearing, sealing rings on both sides, cylindrical outer ring
- With axial guidance, eccentric stud, full complement bearing, sealing rings on both sides, hex socket
- Hex socket, contact seals on both side, inch size
- Hex socket, contact seals on both side, cylindrical outer ring, inch size
- Eccentric stud, hex socket, contact seals on both side, inch size
- Eccentric stud, hex socket, contact seals on both side, cylindrical outer ring, inch size
- Spherical
- Double row
- For cold pilger rolling mills (FAG)
- For bar mills, for loose fit on the roll neck, design 1 (FAG)
- For bar mills, for loose fit on the roll neck, design 2 (FAG)
- For bar mills, for loose fit on the roll neck, design 3 (FAG)
- Radial, for vibratory loads
- Radial, for vibratory loads, tapered bore
- Radial, separable
- Radial, separable, inch size
- Radial, self-aligning
- Radial, self-aligning, contact seals on both side
- Radial, self-aligning, contact seals on both side
- Radial, self-aligning, tapered bore
- Single row
- Radial
- Radial, tapered bore
- Toroidal CARB
- Full complement, tapered bore
- Full complement, seals
- Full complement, cylindrical bore
- Tapered bore
- Cylindrical bore
- Thrust roller bearing
- Needle
- With a centring flange and appropriate washers
- Needle roller and cage assemblies, single direction
- Needle roller and cage assemblies, single direction, inch size
- Needle roller and cage assemblies, single direction, with integrated raceway washers, series FB (NSK)
- Needle roller and cage assemblies, single direction, with integrated raceway washers, series FG (ex2) (NSK)
- Needle roller and cage assemblies, single direction, with integrated raceway washers, series FG (ex3) (NSK)
- Needle roller and cage assemblies, single direction, with integrated raceway washers, series FH (NSK)
- Needle roller and cage assemblies, single direction, series FNTA (NSK)
- Needle roller and cage assemblies, single direction, series NTA, NTC (NSK), inch size
- Axial spherical
- Axial angular contact
- Cylindrical
- Single direction
- Single direction, double row
- Single direction, three row
- Single direction, thrust cylindrical roller and cage assembly
- Single direction, double row, thrust cylindrical roller and cage assembly
- Single direction, thrust cylindrical roller and cage assembly, special series (INA)
- Single direction, three row, thrust cylindrical roller and cage assembly
- Single direction, separable, cylindrical rollers, inch sizes
- Single direction, separable, cylindrical rollers, inch sizes, self-aligning
- Single direction, separable, cylindrical rollers, inch sizes, additional external ring
- Single direction, separable, cylindrical rollers, inch sizes, additional external ring, series RWCT
- Cylindrical roller bearings
- Double row
- Without outer ring
- Full complement cylindrical roller bearing
- CPM production, type A, 2 flange ring, 1 locking ring
- CPM production, type B, without flange ring
- CPM production, type C, ring to one side
- CPM production, type D, rings to both side
- CPM production, type E
- Full complement roller set
- 1 rib on outer ring, 3 ribs on inner ring
- Non-locating bearing, 0 ribs on outer ring (smooth), 3 ribs on inner ring
- Locating bearing
- Locating bearing, central rib on outer ring, 3 ribs on inner ring, sealing shields
- Locating bearing, central rib on outer ring, 3 ribs on inner ring, seals on both sides
- For multi-roll cold rolling mills, design 2 (FAG)
- For multi-roll cold rolling mills, design 3 (FAG)
- Non-locating bearing, separable, with cage
- Non-locating bearing, separable, with cage, type NNU
- Non-locating bearing, full complement cylindrical roller set, spherical outer ring
- Non-locating bearing, with tapered bore, taper 1:12, separable, with cage
- Non-locating bearing, with tapered bore, taper 1:12, separable, with cage, type NNU
- Cardan shaft bearing, CPM production
- Without flange
- With flange
- Locating bearing, full complement cylindrical roller set, spherical outer ring
- Single row
- Without outer ring
- Full complement cylindrical roller bearing
- CPM production, type A, without flange ring
- CPM production, type B, 2 flange ring, 2 locking ring
- CPM production, type C, 2 locking ring BRL
- CPM production, type D, 2 flange ring
- With cage
- Full complement roller set
- 1 rib on outer ring, 2 ribs on inner ring
- 2 ribs on outer ring, 1 rib on inner ring
- Location inner and outer ring
- Location inner and outer ring, inch size
- Disk separator
- Semi-locating bearing, with brass disk separator, type LSL (INA)
- Semi-locating bearing, with plastic roller separators, type ZSL (INA)
- Hub unit
- Without an inner ring
- Non-locating bearing, outer ring without ribs, inch size
- Non-locating bearing, with tapered bore, taper 1:12, separable, with cage
- Non-locating bearing, outer ring with rib, inch size
- High carrying capacity
- Type NCF..ECJB (SKF), with cage, inner ring centred
- Type NUH..ECMH (SKF), with cage, removable, inner ring centred
- Split, for crankshafts in cold pilger rolling mills, design 1 (FAG)
- Split, for crankshafts in cold pilger rolling mills, design 2 (FAG)
- Split, for crankshafts in cold pilger rolling mills, design 3 (FAG)
- Type JOURNAL
- Type N
- Steel cage
- Machined brass cage
- Polyamide cage
- Type NF
- Steel cage
- Type NJ
- Steel cage
- Machined brass cage
- Polyamide cage
- Two piece machined brass cage (SKF)
- Vibrating screen specification, for electric vibrators (FAG)
- Machined brass cage, window-type (SKF)
- Type NU
- Steel cage
- Hybrid (SKF)
- Machined brass cage
- Polyamide cage
- Two piece machined brass cage (SKF)
- Machined brass cage, window-type (SKF)
- Electrically insulating coating INSOCOAT, with a coated inner ring (SKF)
- Electrically insulating coating INSOCOAT, with a coated outer ring (SKF)
- Type NUP
- Machined brass cage
- Polyamide cage
- Two piece machined brass cage (SKF)
- Steel cage
- Machined brass cage, window-type (SKF)
- Three row
- For multi-roll cold rolling mills, design 1 (FAG)
- For multi-roll cold rolling mills, design 4 (FAG)
- Non-locating bearing, full complement cylindrical roller set
- Locating bearing, full complement cylindrical roller set
- Angle rings for cylindrical roller bearings
- Four row
- For interference fit on the roll neck, design 1 (FAG)
- For interference fit on the roll neck, design 2 (FAG)
- For interference fit on the roll neck, design 3 (FAG)
- For interference fit on the roll neck, design 4 (FAG)
- For interference fit on the roll neck, design 5 (FAG)
- For loose fit on the roll neck, design 1 (FAG)
- For loose fit on the roll neck, design 2 (FAG)
- For loose fit on the roll neck, design 3 (FAG)
- For loose fit on the roll neck, design 4 (FAG)
- For loose fit on the roll neck, design 5 (FAG)
- Non-locating bearing, full complement cylindrical roller set
- With tapered bore (1:12), design 1 (FAG)
- With tapered bore (1:12), design 2 (FAG)
- With tapered bore (1:12), design 3 (FAG)
- With tapered bore (1:12), design 4 (FAG)
- Locating bearing, full complement cylindrical roller set
- Eccentric
- Double row
- Single row
- Ball bearings
- Radial insert bearings
- With adapter sleeve
- Spherical outer ring
- Seals on both side, RSR seal, relubrication
- Seals on both side, RSR seal, relubrication, inch size
- Series UK X, seals on both side
- Series UK X, seals on both side, inch size
- With drive slot
- Spherical outer ring
- Seals on both side, R seal, relubrication
- Rubber interliner
- Eccentric locking collar, series CRB(INA), seals on both side
- Eccentric locking collar, series RABRA, RABRB(INA), seals on both side
- Eccentric locking collar, series RCRA, RCRB(INA), seals on both side
- Eccentric locking collar, series RCSMA, RCSMB(INA), seals on both side
- Grub screw to inner ring
- Cylindrical outer ring, snap ring
- Seals on both side, with inner ring extended at one side
- Seals on both side, with inner ring extended at one side, inch size
- Seals on both side, relubrication
- Seals on both side, relubrication, inch size
- Spherical outer ring
- High temperature, for top requirements, inch size, type YAR..-2FW/VA228 (-150°/+350°) (SKF)
- High temperature, for top requirements, type YAR..-2FW/VA228 (-150°/+350°) (SKF)
- High temperature, for the most common applications, inch size, type YAR..-2FW/VA201 (-30°/+250°) (SKF)
- High temperature, for the most common applications, type YAR..-2FW/VA201 (-30°/+250°) (SKF)
- Seals on both side, P seal, without re-relubrication
- Seals on both side, P seal, relubrication
- Seals on both side, P seal, relubrication, for high temperatures (to +250)
- Seals on both side, P seal, relubrication, inch size
- Seals on both side, R seal, relubrication
- Seals on both side, R seal, relubrication, inch size
- Seals on both side, R seal, relubrication, corrosian resistant
- Seals on both side, R seal, relubrication, medium duty
- Seals on both side, R seal, relubrication, medium duty, inch size
- Series SUB(INA), seals on both side, corrosian resistant
- Series SUC(INA), seals on both side, corrosian resistant
- Series SUC(SNR), seals on both side, corrosian resistant
- Series SUC(SNR), seals on both side, corrosian resistant, inch size
- Series YAR, NBR contact seal and additional rubberized flinger on both sides (SKF)
- Series YAR, NBR contact seal and additional rubberized flinger on both sides, inch (SKF)
- Series YAR, NBR contact seal and additional rubberized flinger on both sides, stainless steel (SKF)
- Series YAR, NBR contact seal and additional rubberized flinger on both sides, stainless steel, inch (SKF)
- Series YAR, NBR contact seal and additional rubberized flinger on both sides, zinc-coated inner and outer rings (SKF)
- Series YAR, NBR contact seal and additional rubberized flinger on both sides, zinc-coated inner and outer rings, inch (SKF)
- Series YAR, Energy Efficient bearing, NBR contact seal and additional plain flinger on both sides (SKF)
- Series YAR, Energy Efficient bearing, NBR contact seal and additional plain flinger on both sides, inch (SKF)
- Series YARAG, for agricultural applications (SKF)
- Series YARAG, for agricultural applications, inch (SKF)
- With steel aligning ring
- Eccentric locking collar, series PE(INA), seals on both side
- Cylindrical outer ring, series BE(INA), seals on both side
- Location by SKF ConCentra
- Spherical outer ring
- Series YSP (SKF)
- Series YSP, inch (SKF)
- Series YSP, Energy Efficient bearing (SKF)
- Series YSP, Energy Efficient bearing, inch (SKF)
- Series YSPAG, for agricultural applications (SKF)
- Series YSPAG, for agricultural applications, inch (SKF)
- Wide inner ring
- Cylindrical outer ring
- Series 2..-KRR, 2..-KRR-AH..(INA), seals on both side
- With eccentric locking collar
- Cylindrical outer ring
- Seals on both side, L seal, without re-relubrication
- Seals on both side, P seal, without re-relubrication
- Seals on both side, P seal, without re-relubrication, inch size
- Seals on both side, P seal, without re-relubrication, with special requirements for noise
- Seals on both side, R seal, without re-relubrication
- Cylindrical outer ring, snap ring
- Seals on both side, with inner ring extended at one side
- Seals on both side, with inner ring extended at one side, inch size
- Seals on both side, relubrication
- Seals on both side, relubrication, inch size
- Spherical outer ring
- Seals on both side, relubrication, corrosian resistant
- Seals on both side, L seal, relubrication
- Seals on both side, P seal, without re-relubrication
- Seals on both side, P seal, without re-relubrication, inch size
- Seals on both side, P seal, relubrication
- Seals on both side, P seal, relubrication, inch size
- Seals on both side, P seal, relubrication, corrosian resistant
- Seals on both side, R seal, without re-relubrication
- Seals on both side, R seal, relubrication
- Seals on both side, R seal, relubrication, for high and low temperatures (-40+180)
- Seals on both side, R seal, relubrication, for high temperatures (to +250)
- Seals on both side, R seal, relubrication, inch size
- Seals on both side, R seal, relubrication, corrosian resistant
- Seals on both side, R seal, relubrication, heavy series
- Seals on both side, R seal, relubrication, flinger shields
- Seals on both side, T seal, relubrication
- Series SES(SNR), seals on both side, corrosian resistant
- Series SES(SNR), seals on both side, corrosian resistant, inch size
- Series UD, seals on both side
- Series UD, seals on both side, inch size
- Series YEL, zinc-coated inner ring bore and side faces (SKF)
- Series YELAG, for agricultural applications (SKF)
- Series YELAG, for agricultural applications, inch (SKF)
- Series YET, zinc-coated inner ring bore and side faces (SKF)
- Series YET, Energy Efficient bearing (SKF)
- Series YET, Energy Efficient bearing, inch (SKF)
- Self-aligning
- Cylindrical outer ring
- Series SK..-KRR(INA), seals on both side, inner ring with hexagonal bore
- Series SK..-KTT(INA), seals on both side, inner ring with hexagonal bore
- Spherical outer ring
- Seals on both side, P seal, without re-relubrication
- Series GVK(E)..-KTT-B(INA), seals on both side, inner ring with square bore
- Series GVKE..-KRR-B(INA), seals on both side, inner ring with square bore
- Series SK..-KRR-B(INA), seals on both side, inner ring with hexagonal bore
- Series SK..-KTT-B(INA), seals on both side, inner ring with hexagonal bore
- Series VK(E)..-KTT-B(INA), seals on both side, inner ring with square bore
- Track rollers
- Double row
- Without profile
- Gap seals on both sides
- Gap seals on both sides, cylindrical outer ring
- Sealed on both sides
- Sealed on both sides, cylindrical outer ring
- Profiled
- Profile of arrow-shaped arch, gap seals on both sides
- Single row
- With plastic tyre, sealed on both sides
- Sealed on both sides
- Sealed on both sides, cylindrical outer ring
- Stud type track rollers
- Double row
- Lip seal on one side
- Lip seals on both sides
- Eccentric stud, gap seals on both sides
- Single row
- Lip seal on one side
- Sensor bearing units
- Motor encoder units (SKF)
- Angular contact ball bearing
- Double row
- For compressors of air conditioners
- Special
- Non-separable, for wire mills, design 1 (FAG)
- Non-separable, for wire mills, design 2 (FAG)
- Non-separable, e.g. for oil film bearings (FAG)
- CPM production, series B
- CPM production, series C
- CPM production, series D
- Hub bearing (unit)
- Generation 1
- Generation 2
- Generation 3
- Contact angle 25°
- Non-contact radial seals on both side
- Lip seals on both side
- Lip seals on both side, snap ring groove, locking ring
- Open
- Gap seals on both side
- Gap seals on both side, snap ring groove, locking ring
- Contact angle 30°
- Lip seals on both side
- Open, polyamide cage
- Open, snap ring groove, locking ring
- Open, steel cage
- Gap seals on both side
- Gap seals on both side, energy Efficient bearing
- Contact angle 35°
- Open, with filling slot
- Contact angle 40°
- Snap ring groove, integral design
- Contact angle 45°
- Separable, with split inner ring
- Single row
- Special
- Non-separable, e.g. for oil film bearings (FAG)
- CPM production
- Contact angle 40°
- For single use, pressed brass cage
- For single use, polyamide cage
- For single use, polyamide cage, with seals
- For single use, steel cage
- For single use, machined brass cage
- For universal use, moulded cage of polyether ether ketone (PEEK GF16), balls centered
- For universal use, moulded cage of polyether ether ketone (PEEK GF16), balls centered, extra light preload
- For universal use, machined brass cage
- For universal use, polyamide cage
- For universal use, steel cage
- For universal use, pressed brass cage
- Magneto bearings
- Precision (spindle)
- Contact angle 15°
- High speed, design B, mounting by pair or sets, non-contact seal on both side, light preload (SKF)
- High speed, design B, mounting by pair or sets, non-contact seal on both side, medium preload (SKF)
- High speed, design B, mounting by pair or sets, non-contact seal on both side, heavy preload (SKF)
- High speed, design B, mounting by pair or sets, light preload (SKF)
- High speed, design B, mounting by pair or sets, medium preload (SKF)
- High speed, design B, mounting by pair or sets, heavy preload (SKF)
- High speed, mounting by pair or sets, light preload
- High speed, mounting by pair or sets, medium preload
- High speed, mounting by pair or sets, heavy preload
- High speed, non-contact seal, mounting by pair or sets, light preload
- High speed, non-contact seal, mounting by pair or sets, medium preload
- High speed, non-contact seal, mounting by pair or sets, heavy preload
- High speed, ceramic ball, design B, mounting by pair or sets, non-contact seal on both side, light preload (SKF)
- High speed, ceramic ball, design B, mounting by pair or sets, non-contact seal on both side, medium preload (SKF)
- High speed, ceramic ball, design B, mounting by pair or sets, non-contact seal on both side, heavy preload (SKF)
- High speed, ceramic ball, design B, mounting by pair or sets, light preload (SKF)
- High speed, ceramic ball, design B, mounting by pair or sets, medium preload (SKF)
- High speed, ceramic ball, design B, mounting by pair or sets, heavy preload (SKF)
- High speed, ceramic ball, mounting by pair or sets, non-contact seal, light preload
- High speed, ceramic ball, mounting by pair or sets, non-contact seal, medium preload
- High speed, ceramic ball, mounting by pair or sets, non-contact seal, heavy preload
- High speed, ceramic ball, mounting by pair or sets, light preload
- High speed, ceramic ball, mounting by pair or sets, medium preload
- High speed, ceramic ball, mounting by pair or sets, heavy preload
- Machined brass cage, outer ring centred, mounting by pairs or sets (SKF)
- Machined brass cage, outer ring centred, ceramic ball, mounting by pairs or sets (SKF)
- Ceramic ball, mounting by pair or sets, non-contact seal, light preload
- Ceramic ball, mounting by pair or sets, non-contact seal, medium preload
- Ceramic ball, mounting by pair or sets, non-contact seal, heavy preload
- Ceramic ball, mounting by pair or sets, light preload
- Ceramic ball, mounting by pair or sets, medium preload
- Ceramic ball, mounting by pair or sets, heavy preload
- Rings made of stainless steel CRONIDUR 30, high speed, ceramic balls, non-contact seal on both side, light preload
- Rings made of stainless steel CRONIDUR 30, high speed, ceramic balls, non-contact seal on both side, medium preload
- Rings made of stainless steel CRONIDUR 30, high speed, ceramic balls, non-contact seal on both side, heavy preload
- Rings made of stainless steel CRONIDUR 30, high speed, ceramic balls, light preload
- Rings made of stainless steel CRONIDUR 30, high speed, ceramic balls, medium preload
- Rings made of stainless steel CRONIDUR 30, high speed, ceramic balls, heavy preload
- Rings made of stainless steel CRONIDUR 30, ceramic balls, non-contact seal on both side, light preload
- Rings made of stainless steel CRONIDUR 30, ceramic balls, non-contact seal on both side, medium preload
- Rings made of stainless steel CRONIDUR 30, ceramic balls, non-contact seal on both side, heavy preload
- Rings made of stainless steel CRONIDUR 30, ceramic balls, light preload
- Rings made of stainless steel CRONIDUR 30, ceramic balls, medium preload
- Rings made of stainless steel CRONIDUR 30, ceramic balls, heavy preload
- Super precision, mounting by pair or sets, extra light preload (NSK)
- Super precision, ceramic balls, mounting by pair or sets, extra light preload (NSK)
- Super precision, rings made of stainless steel SHX, ceramic balls, mounting by pair or sets, extra light preload (NSK)
- Standard version, mounting by pairs or sets, non-contact seals on both sides, light preload
- Standard version, mounting by pairs or sets, non-contact seals on both sides, medium preload
- Standard version, mounting by pairs or sets, non-contact seals on both sides, heavy preload
- Standard, for mounting in pairs or sets, light preload
- Standard, for mounting in pairs or sets, medium preload
- Standard, for mounting in pairs or sets, heavy preload
- Contact angle 18°
- High speed, mounting by pair or sets, light preload (NSK)
- High speed, mounting by pair or sets, extra light preload (NSK)
- High speed, non-contact seal, mounting by pair or sets, light preload (NSK)
- High speed, non-contact seal, mounting by pair or sets, extra light preload (NSK)
- High speed, ceramic ball, mounting pair or sets, non-contact seal (SKF)
- High speed, ceramic ball, mounting by pair or sets, non-contact seal, light preload (NSK)
- High speed, ceramic ball, mounting by pair or sets, non-contact seal, extra light preload (NSK)
- High speed, ceramic ball, mounting by pair or sets, light preload (NSK)
- High speed, ceramic ball, mounting by pair or sets, extra light preload (NSK)
- Rings made of stainless steel SHX, high speed, ceramic balls, mounting by pair or sets, non-contact seal, light preload (NSK)
- Rings made of stainless steel SHX, high speed, ceramic balls, mounting by pair or sets, non-contact seal, extra light preload (NSK)
- Rings made of stainless steel SHX, high speed, ceramic balls, mounting by pair or sets, light preload (NSK)
- Rings made of stainless steel SHX, high speed, ceramic balls, mounting by pair or sets, extra light preload (NSK)
- Contact angle 25°
- High speed, design B, mounting by pair or sets, non-contact seal, light preload (SKF)
- High speed, design B, mounting by pair or sets, non-contact seal, medium preload (SKF)
- High speed, design B, mounting by pair or sets, non-contact seal, heavy preload (SKF)
- High speed, design B, mounting by pair or sets, light preload (SKF)
- High speed, design B, mounting by pair or sets, medium preload (SKF)
- High speed, design B, mounting by pair or sets, heavy preload (SKF)
- High speed, mounting by pair or sets, light preload
- High speed, mounting by pair or sets, light preload (NSK)
- High speed, mounting by pair or sets, extra light preload (NSK)
- High speed, mounting by pair or sets, medium preload
- High speed, mounting by pair or sets, heavy preload
- High speed, non-contact seal, mounting by pair or sets, light preload
- High speed, non-contact seal, mounting by pair or sets, light preload (NSK)
- High speed, non-contact seal, mounting by pair or sets, extra light preload (NSK)
- High speed, non-contact seal, mounting by pair or sets, medium preload
- High speed, non-contact seal, mounting by pair or sets, heavy preload
- High speed, ceramic ball, design B, mounting by pair or sets, non-contact seal, light preload (SKF)
- High speed, ceramic ball, design B, mounting by pair or sets, non-contact seal, medium preload (SKF)
- High speed, ceramic ball, design B, mounting by pair or sets, non-contact seal, heavy preload (SKF)
- High speed, ceramic ball, design B, mounting by pair or sets, light preload (SKF)
- High speed, ceramic ball, design B, mounting by pair or sets, medium preload (SKF)
- High speed, ceramic ball, design B, mounting by pair or sets, heavy preload (SKF)
- High speed, ceramic ball, mounting by pair or sets, non-contact seal, light preload
- High speed, ceramic ball, mounting by pair or sets, non-contact seal, light preload (NSK)
- High speed, ceramic ball, mounting by pair or sets, non-contact seal, extra light preload (NSK)
- High speed, ceramic ball, mounting by pair or sets, non-contact seal, medium preload
- High speed, ceramic ball, mounting by pair or sets, non-contact seal, heavy preload
- High speed, ceramic ball, mounting by pair or sets, light preload
- High speed, ceramic ball, mounting by pair or sets, light preload (NSK)
- High speed, ceramic ball, mounting by pair or sets, extra light preload (NSK)
- High speed, ceramic ball, mounting by pair or sets, medium preload
- High speed, ceramic ball, mounting by pair or sets, heavy preload
- Machined brass cage, outer ring centred, mounting by pairs or sets (SKF)
- Machined brass cage, outer ring centred, ceramic ball, mounting by pairs or sets (SKF)
- Ceramic ball, mounting by pair or sets, non-contact seal, light preload
- Ceramic ball, mounting by pair or sets, non-contact seal, medium preload
- Ceramic ball, mounting by pair or sets, non-contact seal, heavy preload
- Ceramic ball, mounting by pair or sets, light preload
- Ceramic ball, mounting by pair or sets, medium preload
- Ceramic ball, mounting by pair or sets, heavy preload
- Rings made of stainless steel CRONIDUR 30, high speed, ceramic balls, non-contact seal on both side, light preload
- Rings made of stainless steel CRONIDUR 30, high speed, ceramic balls, non-contact seal on both side, medium preload
- Rings made of stainless steel CRONIDUR 30, high speed, ceramic balls, non-contact seal on both side, heavy preload
- Rings made of stainless steel CRONIDUR 30, high speed, ceramic balls, light preload
- Rings made of stainless steel CRONIDUR 30, high speed, ceramic balls, medium preload
- Rings made of stainless steel CRONIDUR 30, high speed, ceramic balls, heavy preload
- Rings made of stainless steel CRONIDUR 30, ceramic balls, non-contact seal on both side, light preload
- Rings made of stainless steel CRONIDUR 30, ceramic balls, non-contact seal on both side, medium preload
- Rings made of stainless steel CRONIDUR 30, ceramic balls, non-contact seal on both side, heavy preload
- Rings made of stainless steel CRONIDUR 30, ceramic balls, light preload
- Rings made of stainless steel CRONIDUR 30, ceramic balls, medium preload
- Rings made of stainless steel CRONIDUR 30, ceramic balls, heavy preload
- Rings made of stainless steel SHX, high speed, ceramic balls, mounting by pair or sets, non-contact seal, light preload (NSK)
- Rings made of stainless steel SHX, high speed, ceramic balls, mounting by pair or sets, non-contact seal, extra light preload (NSK)
- Rings made of stainless steel SHX, high speed, ceramic balls, mounting by pair or sets, light preload (NSK)
- Rings made of stainless steel SHX, high speed, ceramic balls, mounting by pair or sets, extra light preload (NSK)
- Standard version, mounting by pairs or sets, non-contact seals on both sides, light preload
- Standard version, mounting by pairs or sets, non-contact seals on both sides, medium preload
- Standard version, mounting by pairs or sets, non-contact seals on both sides, heavy preload
- Standard, for mounting in pairs or sets, light preload
- Standard, for mounting in pairs or sets, medium preload
- Standard, for mounting in pairs or sets, heavy preload
- Contact angle 30°
- Standard, for mounting in pairs or sets, light preload (NSK)
- Standard, for mounting in pairs or sets, medium preload (NSK)
- Four point contact
- Separable, with split inner ring
- Separable, with split inner ring, inch size
- Separable, with split inner ring, 2 locating slots in one outer ring
- Separable, with split outer ring
- Radial ball bearings
- Double row
- Open
- With shields 2Z
- With seals 2RS
- Double row, spherical
- With tapered bore
- Open
- With adapter sleeve
- With adapter sleeve, seals 2RS
- With seals 2RS
- With cyilindrical bore
- Inch size
- Open
- With seals 2RS
- With wide inner ring
- Series 11200
- Series 11500
- Series 71200
- Single row
- Without flange
- Inch size
- Inch size, corrosion resistant
- Felt seals on both side
- Felt seals on both side, wide inner ring
- Felt seal on one side
- Felt seal on one side, shield on second side
- Felt seal on one side, shield on second side, wide inner ring
- Felt seal on one side, wide inner ring
- Open
- With shields 2Z
- With shields 2Z, inch size
- With shield Z
- With seals 2RS
- With seals 2RS, inch size
- With seal RS
- With low-friction seals 2RSL
- With low-friction seals 2RZ
- With low-friction seal RSL
- With low-friction seal RZ
- High temperature
- For high demands, type 2Z/VA208 (-150°/+350°) (SKF)
- For top requirements, type 2Z/VA228 (-150°/+350°) (SKF)
- Added protection with shields, type 2Z/VA201 (-30°/+250°) (SKF)
- For the most common applications, type VA201 (-30°/+250°) (SKF)
- Type BHT 320°-350° (-30°/+320°) (BECO)
- Type BHT FB 400° (-40°/+400°) (BECO)
- Type BHT FB 450° BECO PLUS (-50°/+450°) (BECO)
- Type BHTS 2RS C3 VT 180° (-30°/+180°) (BECO)
- Type BHTS 2RS C4 VT 200° (-30°/+200°) (BECO)
- Type BHTS 2RS C4 VT 220° (-40°/+220°) (BECO)
- Type BHTS 2RS VT 250°-280° (-40°/+250°) (BECO)
- Type BHTS ZZ 280° (-40°/+280°) (BECO)
- Type BHTS ZZ 350° BECO PLUS (-10°/+350°) (BECO)
- Type BHTS ZZ C4 220°-250° (-40°/+220°) (BECO)
- Type BHTS ZZ C4 VT 200° (-30°/+200°) (BECO)
- Type BHTS ZZ GR CG 350° (-50°/+350°) (BECO)
- Type BLS ZZ -70° (-70°/+100°) (BECO)
- Hybrid
- Non-contact seal on both sides (SKF)
- Open (SKF)
- Open, material-zirconium dioxide
- Open, material-silicon nitride
- Seal on both sides (SKF)
- Special design for wind turbinegenerators (SKF)
- For generators
- For car hubs
- Metric size
- For electric motors
- With normal clearance (CN), shields 2Z (SMB)
- With normal clearance (CN), seals 2RS (SMB)
- With increased clearance (C3), shields 2Z (SMB)
- With increased clearance (C3), seals 2RS (SMB)
- Corrosion resistant
- Open
- Open, stainless steel (AISI 316)
- Open, wide inner ring, inch size
- Shields 2Z
- With shields 2Z, inch size
- Shields 2Z, wide inner ring, inch size
- Seals 2RS
- With seals 2RS, inch size
- With seals PE, stainless steel (AISI 316)
- Polymer
- Open, with flange, stainless steel ball (AISI 316)
- Open, with flange, stainless steel ball (AISI 316), inch size
- Open, with flange, glass ball
- Open, with flange, glass ball, inch size
- Open, stainless steel ball (AISI 316)
- Open, stainless steel ball (AISI 316), inch size
- Open, stainless steel ball (SKF)
- Open, glass ball
- Open, glass ball (SKF)
- Open, glass ball, inch size
- With snap ring groove
- Open
- Snap ring
- Snap ring, felt seals on both side
- Snap ring, felt seals on both side, wide inner ring
- Snap ring, felt seals on one side, shield on second side, wide inner ring
- Snap ring, felt seals on one side, wide inner ring
- Snap ring, shields 2Z
- Snap ring, shield Z
- Snap ring, seals 2RS
- Snap ring, seal RS
- With tapered bore
- Open
- Seals 2RS
- With filling slot
- Open
- Open, with snap ring groove, snap ring
- Shields 2Z
- With shield Z
- With snap ring groove, snap ring, shields 2Z
- With snap ring groove, snap ring, shield Z
- With flange
- Inch size
- Open
- Open, corrosian resistant
- Open, corrosion resistant, inch size
- Open, corrosion resistant, wide inner ring, inch size
- With shields 2Z
- With shields 2Z, inch size
- With shields 2Z, corrosion resistant
- Shields 2Z, corrosion resistant, inch size
- Shields 2Z, corrosion resistant, wide inner ring, inch size
- Shields 2Z, wide inner ring, inch size
- With seals 2RS
- Seals 2RS, corrosion resistant
- Seals 2RS, corrosion resistant, inch size
- Special
- FAG production
- SC series production NTN
- Electrically insulating coating INSOCOAT, with a coated inner ring (SKF)
- Electrically insulating coating INSOCOAT, with a coated outer ring (SKF)
- Special material of cage (ring)
- Brass cage M, class P5
- Polyamide cage, class P5
- Energy Efficient bearing
- With shields 2Z
- With seals 2RS
- Thin section ball bearing
- Angular contact
- Open, inch size
- Open, metric
- Open, ultrathin, metric
- Open, stainless steel ball and ring, inch size
- Open, stainless steel ball, inch size
- Four point contact
- Contact seals on both side, inch size
- Open, inch size
- Open, metric
- Open, ultrathin, metric
- Open, stainless steel ball and ring, inch size
- Open, stainless steel ball, inch size
- Radial
- Contact seals on both side, inch size
- Open, inch size
- Open, metric
- Open, ultrathin, metric
- Open, stainless steel ball and ring, inch size
- Open, stainless steel ball, inch size
- Axial angular contact ball bearing
- Double direction
- For bolt mounting, lip seals on both side
- For bolt mounting, lip seals on both side, increased tolerances
- For bolt mounting, lip seals on both side, matched pair
- For bolt mounting, gap seals on both side
- For bolt mounting, gap seals on both side, increased tolerances
- Lip seals on both side
- Lip seals on both side, increased tolerances
- Separable
- Matched pair, lip seals on both side
- Gap seals on both side
- Single direction
- Series 751100
- Contact angle 30°
- High speed, duplex, light preload (NSK)
- High speed, duplex, extra light preload (NSK)
- High speed, ceramic ball, duplex, light preload (NSK)
- High speed, duplex, ceramic ball, extra light preload (NSK)
- Contact angle 40°
- High speed, duplex, light preload (NSK)
- High speed, duplex, extra light preload (NSK)
- High speed, ceramic ball, duplex, light preload (NSK)
- High speed, duplex, ceramic ball, extra light preload (NSK)
- Contact angle 55°
- Series TAC02/TAC03, ball screw support bearings, for high-load drive applications (NSK)
- Contact angle 60°
- Ball screw support bearings
- Ball screw support bearings, mounting for pair (FAG)
- Ball screw support bearings, mounting for pair, shields 2Z (FAG)
- Ball screw support bearings, with seals 2RS
- Unit
- Series DKLFA, double direction, with flange, lip seals on both side
- Series ZKLFA, double direction, with flange, lip seals on both side
- Series ZKLFA, double direction, with flange, gap seals on both side
- Series ZKLR, double direction, with flange, lip seals on both side
- Series ZKLR, double direction, with flange, gap seals on both side
- Thrust ball bearing
- Double direction
- Separable
- Separable, series 19
- Separable, series 8
- With spherical housing locating washer and one or two seating washers, separable
- With spherical housing locating washer, separable
- Single direction
- Single direction, thrust ball and cage assembly, special series (INA)
- Seating washers for thrust ball bearings 4100
- Polymer, stainless steel ball (SKF)
- Polymer, glass ball (SKF)
- Separable
- Separable, inch size
- Separable, slot in raceway
- Separable, miniature
- Separable, miniature, without raceway
- Separable, flat raceway, inch size
- Separable, series 20, inch size
- Separable, series 9/10/29/39
- Separable, special series (INA)
- With bracket
- With bracket, inch size
- With spherical housing locating washer and seating washer, separable
- With spherical housing locating washer, separable
- Separable, angular adjustment facility series 41/5
-
Mounted bearings and housings
- Сross reference, interchange tables
- Bearings and bearing units (part 1)
- Bearings and bearing units FKL
- Bearings and bearing units FYH
- Bearings and bearing units LBC
- Bearings and bearing units SLB
- Bearings and bearing units TIMKEN/FAFNIR
- Bearings and bearing units for agricultural applications TIMKEN/FAFNIR
- Housing units
- Cartridge units
- Cast iron housing
- Radial insert ball bearing with adapter sleeve
- With inner ring extended on both sides
- Radial insert ball bearing with grub screws in inner ring
- With inner ring extended on both sides
- With inner ring extended at one side
- Type UCCX (ASAHI)
- Type UCLC (ASAHI)
- Radial insert ball bearing with eccentric locking collar
- With inner ring extended on both sides
- With inner ring extended at one side
- Take-up housing units
- Cast iron and sheet steel housing
- Radial insert ball bearing with adapter sleeve
- With inner ring extended on both sides
- Radial insert ball bearing with grub screws in inner ring
- With inner ring extended on both sides
- With inner ring extended at one side
- Radial insert ball bearing with eccentric locking collar
- With inner ring extended on both sides
- With inner ring extended at one side
- Type PHUSE (INA)
- Cast iron housing
- Radial insert ball bearing with adapter sleeve
- With inner ring extended on both sides, for tensioning frame
- With inner ring extended on both sides, bracket
- With inner ring extended on both sides, massive bearing units
- Radial insert ball bearing with grub screws in inner ring
- With inner ring extended on both sides, for tensioning frame
- With inner ring extended on both sides, for tensioning frame, stainless steel
- With inner ring extended on both sides, for tensioning frame, stainless steel, inch size
- With inner ring extended on both sides, bracket
- With inner ring extended on both sides, massive bearing units
- With inner ring extended at one side
- With inner ring extended at one side, for tensioning frame
- With inner ring extended at one side, bracket
- With inner ring extended at one side, wide base, massive bearing units
- Type CUCT..C with cast iron covers, open cover (ASAHI)
- Type CUCT..CE with cast iron covers, closed cover (ASAHI)
- Type TU..TF (SKF), inch
- Type UCST (ASAHI)
- Type UCT..C with pressed steel covers, open cover (ASAHI)
- Type UCT..E with pressed steel covers, closed cover (ASAHI)
- Type UCTX (ASAHI)
- Radial insert ball bearing with eccentric locking collar
- With inner ring extended on both sides, for tensioning frame
- With inner ring extended on both sides, bracket
- With inner ring extended on both sides, massive bearing units
- With inner ring extended at one side
- With inner ring extended at one side, for tensioning frame
- With inner ring extended at one side, for tensioning frame, stainless steel
- With inner ring extended at one side, for tensioning frame, stainless steel, inch size
- With inner ring extended at one side, bracket
- With inner ring extended at one side, wide base, massive bearing units
- Type RTUEO (INA)
- Type THE (INA)
- Type TTUE (INA)
- Type TU..FM (SKF)
- Type UDT (ASAHI)
- Sheet steel housing
- Radial insert ball bearing with grub screws in inner ring
- With inner ring extended at one side
- Radial insert ball bearing with eccentric locking collar
- With inner ring extended at one side
- Plummer block
- Cast steel housing
- Radial insert ball bearing with grub screws in inner ring
- Type UCPK (ASAHI)
- Rubber housing
- Radial insert ball bearing with grub screws in inner ring
- Type UCRP (ASAHI)
- Narrow cast iron housing
- Radial insert ball bearing with adapter sleeve
- Подшипниковые узлы
- With inner ring extended on both sides, massive bearing units
- With inner ring extended on both sides, wide base
- Radial insert ball bearing with grub screws in inner ring
- With inner ring extended on both sides
- With inner ring extended on both sides, massive bearing units
- With inner ring extended on both sides, massive bearing units, stainless steel
- With inner ring extended on both sides, massive bearing units, stainless steel, inch size
- With inner ring extended on both sides, wide base
- With inner ring extended at one side
- With inner ring extended at one side, wide base, massive bearing units
- With inner ring extended at one side, wide base
- Radial insert ball bearing with eccentric locking collar
- With inner ring extended on both sides
- With inner ring extended on both sides, massive bearing units
- With inner ring extended on both sides, wide base
- With inner ring extended at one side
- With inner ring extended at one side, wide base, massive bearing units
- With inner ring extended at one side, wide base, massive bearing units, stainless steel
- With inner ring extended at one side, wide base, massive bearing units, stainless steel, inch size
- With inner ring extended at one side, wide base
- Type TSHE (INA)
- Cast iron housing
- Non-locating bearing, drive slot on inner ring
- Type RASEL (INA)
- Radial insert ball bearing with adapter sleeve
- With inner ring extended on both sides
- With inner ring extended on both sides, high units
- With inner ring extended on both sides, massive bearing units
- With inner ring extended on both sides, wide base
- Type RASEA (INA)
- Type SYJ..KF (SKF), inch
- Type UKPX (ASAHI)
- Radial insert ball bearing with grub screws in inner ring
- With inner ring extended on both sides
- With inner ring extended on both sides, high units
- With inner ring extended on both sides, massive bearing units
- With inner ring extended on both sides, massive bearing units, stainless steel
- With inner ring extended on both sides, massive bearing units, stainless steel, inch size
- With inner ring extended on both sides, massive bearing units, medium duty
- With inner ring extended on both sides, wide base
- With inner ring extended at one side
- With inner ring extended at one side, high units
- With inner ring extended at one side, massive bearing units
- With inner ring extended at one side, wide base
- Type BLLP (ASAHI)
- Type CUCP..C with cast iron covers, open cover (ASAHI)
- Type CUCP..CE with cast iron covers, closed cover (ASAHI)
- Type RASEY (INA), dimensions sizes by standard JIS B 1559
- Type SY..TF/VA201, high temperature (-40°/+250°) (SKF)
- Type SY..TF/VA201, high temperature, inch (-40°/+250°) (SKF)
- Type SY..TF/VA228, high temperature, for high demands (-150°/+350°) (SKF)
- Type SY..TF/VA228, high temperature, for high demands, inch (-150°/+350°) (SKF)
- Type SY..TR (SKF)
- Type SY..TR (SKF), inch
- Type SY/SYJ..TF (SKF), inch
- Type SYK..TF (SKF), composite
- Type SYK..TR (SKF), composite
- Type UCEP (ASAHI)
- Type UCIP (ASAHI)
- Type UCLP (ASAHI)
- Type UCP..C with pressed steel covers, open cover (ASAHI)
- Type UCP..E with pressed steel covers, closed cover (ASAHI)
- Radial insert ball bearing with eccentric locking collar
- With inner ring extended on both sides
- With inner ring extended on both sides, high units
- With inner ring extended on both sides, massive bearing units
- With inner ring extended on both sides, massive bearing units, stainless steel
- With inner ring extended on both sides, massive bearing units, stainless steel, inch size
- With inner ring extended on both sides, wide base
- With inner ring extended at one side
- With inner ring extended at one side, high units
- With inner ring extended at one side, massive bearing units
- With inner ring extended at one side, wide base
- Type LASE (INA)
- Type PASE (INA), coated with CORROTECT
- Type RASE (INA), for high temperatures (+250)
- Type RASE (INA), coated with CORROTECT
- Type RSAO (INA)
- Type SY..FM (SKF), inch
- Type SY..WF (SKF), inch
- Type TASE (INA)
- Type UDP (ASAHI)
- Sheet steel housing
- Radial insert ball bearing with grub screws in inner ring
- With inner ring extended at one side
- Type P..TF (SKF)
- Type P..TF (SKF), inch
- Type P..TR (SKF)
- Type P..TR (SKF), inch
- Radial insert ball bearing with grub screws in inner ring and rubber interliner
- Type BPR (ASAHI)
- Radial insert ball bearing with eccentric locking collar
- With inner ring extended at one side
- Type P..FM (SKF), inch
- Type P..WF (SKF)
- Type PBS (INA)
- Radial insert ball bearing with eccentric locking collar and rubber interliner
- Type KHPR (ASAHI)
- Type P..R..FM (SKF)
- Type P..R..FM (SKF), inch
- Type P..R..RM (SKF)
- Type P..R..TF (SKF)
- Type P..R..TF (SKF), inch
- Type P..R..WF (SKF)
- Type RPB (INA)
- Conveyor belt tensioner unit
- Radial insert ball bearing with adapter sleeve
- With inner ring extended on both sides
- Radial insert ball bearing with grub screws in inner ring
- With inner ring extended on both sides
- With inner ring extended at one side
- Radial insert ball bearing with eccentric locking collar
- With inner ring extended on both sides
- With inner ring extended at one side
- Two-bolt flanged housing units
- Cast iron housing
- Radial insert ball bearing with adapter sleeve
- With inner ring extended on both sides
- With inner ring extended on both sides, massive bearing units
- With inner ring extended on both sides, with centring rim
- Type FYTJ..KF (SKF), inch
- Type RCJTA (INA)
- Radial insert ball bearing with grub screws in inner ring
- With inner ring extended on both sides
- With inner ring extended on both sides, massive bearing units
- With inner ring extended on both sides, massive bearing units, stainless steel
- With inner ring extended on both sides, massive bearing units, stainless steel, inch size
- With inner ring extended on both sides, massive bearing units, medium duty
- With inner ring extended on both sides, with centring rim
- With inner ring extended at one side
- With inner ring extended at one side, wide base, massive bearing units
- With inner ring extended at one side, with centring rim
- With inner ring extended at one side, wide base
- Type BLFL (ASAHI)
- Type CUCFL..C with cast iron covers, open cover (ASAHI)
- Type CUCFL..CE with cast iron covers, closed cover (ASAHI)
- Type FYT..RM (SKF), inch
- Type FYT..TF/VA201, high temperature (-40°/+250°) (SKF)
- Type FYT..TF/VA201, high temperature, inch size (-40°/+250°) (SKF)
- Type FYT..TF/VA228, high temperature, for high demands (-150°/+350°) (SKF)
- Type FYT..TF/VA228, high temperature, for high demands, inch size (-150°/+350°) (SKF)
- Type FYT/FYTB/FYTJ..TF (SKF), inch
- Type FYTB..TR (SKF)
- Type FYTBK..TF (SKF), composite
- Type FYTBK..TR (SKF), composite
- Type RCJTY (INA), dimensions sizes by standard JIS B 1559
- Type UCFL..C with pressed steel covers, open cover (ASAHI)
- Type UCFL..E with pressed steel covers, closed cover (ASAHI)
- Type UCFT (ASAHI)
- Radial insert ball bearing with eccentric locking collar
- Without relubrication facility, type FLCTE (INA)
- With inner ring extended on both sides
- With inner ring extended on both sides, massive bearing units
- With inner ring extended on both sides, with centring rim
- With inner ring extended at one side
- With inner ring extended at one side, wide base, massive bearing units
- With inner ring extended at one side, wide base, massive bearing units, stainless steel
- With inner ring extended at one side, wide base, massive bearing units, stainless steel, inch size
- With inner ring extended at one side, with centring rim
- With inner ring extended at one side, wide base
- Type FYT..FM (SKF), inch
- Type LCJT (INA)
- Type PCFT (INA)
- Type PCJT (INA), coated with CORROTECT
- Type RCJT (INA), for high temperatures (+250)
- Type RCJT (INA), coated with CORROTECT
- Type TCJT (INA)
- Type UDFL (ASAHI)
- Sheet steel housing
- Radial insert ball bearing with grub screws in inner ring
- With inner ring extended at one side
- Type PFT..TF (SKF)
- Type PFT..TF (SKF), inch
- Type PFT..TR (SKF)
- Type PFT..TR (SKF), inch
- Radial insert ball bearing with eccentric locking collar
- With inner ring extended at one side
- Rubber interliner, type RCSMF (INA)
- Type PCSLT (INA)
- Type PFT..FM (SKF), inch
- Type PFT..WF (SKF)
- Type RALT (INA)
- Three-bolt flanged housing units
- Cast iron housing
- With inner ring extended at one side
- Radial insert ball bearing with eccentric locking collar
- With inner ring extended at one side
- Sheet steel housing
- Radial insert ball bearing with grub screws in inner ring
- With inner ring extended at one side
- Type PFD..TF (SKF)
- Type PFD..TF (SKF), inch
- Type PFD..TR (SKF)
- Type PFD..TR (SKF), inch
- Radial insert ball bearing with eccentric locking collar
- Without relubrication facility, type RALTR (INA)
- With inner ring extended at one side
- Type PFD..FM (SKF), inch
- Type PFD..WF (SKF)
- Type RRTR (INA)
- Three-bolt flange bracket units
- Cast iron housing
- Radial insert ball bearing with grub screws in inner ring
- With inner ring extended at one side, stainless steel
- Type UCFK (ASAHI)
- Radial insert ball bearing with eccentric locking collar
- With inner ring extended on both sides, stainless steel
- Three/four-bolt flanged housing units
- Sheet steel housing
- Radial insert ball bearing with grub screws in inner ring
- With inner ring extended at one side
- Anti-corrosion protection, without relubrication facility, type RRY..-VA (INA)
- Anti-corrosion protection, type GRRY..-VA (INA)
- Type PF..TF (SKF)
- Type PF..TF (SKF), inch
- Type PF..TR (SKF)
- Type PF..TR (SKF), inch
- Radial insert ball bearing with eccentric locking collar
- With inner ring extended at one side
- Type GRA (INA)
- Type PF..FM (SKF), inch
- Type PF..WF (SKF)
- Four-bolt flanged housing units
- Cast iron housing
- Non-locating bearing, drive slot on inner ring
- Type RCJL (INA), for temperatures from -40°/+180°C
- Radial insert ball bearing with adapter sleeve
- With inner ring extended on both sides
- With inner ring extended on both sides, round flanged
- With inner ring extended on both sides, massive bearing units
- With inner ring extended on both sides, with centring rim
- With inner ring extended on both sides, with centring rim, round flanged
- Type FYJ..KF (SKF), inch
- Type UKFX (ASAHI)
- Radial insert ball bearing with grub screws in inner ring
- With inner ring extended on both sides
- With inner ring extended on both sides, round flanged
- With inner ring extended on both sides, massive bearing units
- With inner ring extended on both sides, stainless steel
- With inner ring extended on both sides, stainless steel, inch size
- With inner ring extended on both sides, with centring rim
- With inner ring extended on both sides, with centring rim, round flanged
- With inner ring extended on both sides, medium duty
- With inner ring extended at one side
- With inner ring extended at one side, round flanged
- With inner ring extended at one side, wide base, massive bearing units
- With inner ring extended at one side, massive bearing units, round flanged
- With inner ring extended at one side, with centring rim, round flanged
- Centring spigot, type PMEY (INA)
- Type CUCF..C with cast iron covers, open cover (ASAHI)
- Type CUCF..CE with cast iron covers, closed cover (ASAHI)
- Type CUCFC..C with cast iron covers, open cover (ASAHI)
- Type CUCFC..CE with cast iron covers, closed cover (ASAHI)
- Type FY..RM (SKF), inch
- Type FY..TF/VA201, high temperature (-40°/+250°) (SKF)
- Type FY..TF/VA201, high temperature, inch size (-40°/+250°) (SKF)
- Type FY..TF/VA228, high temperature, for high demands (-150°/+350°) (SKF)
- Type FY..TF/VA228, high temperature, for high demands, inch size (-150°/+350°) (SKF)
- Type FY..TR (SKF)
- Type FY/FYJ/FYM..TF (SKF), inch
- Type FYK..TF (SKF), composite
- Type FYK..TR (SKF), composite
- Type RCJY..-JIS (INA)
- Type UCF..C with pressed steel covers, open cover (ASAHI)
- Type UCF..E with pressed steel covers, closed cover (ASAHI)
- Type UCFC..C with pressed steel covers, open cover (ASAHI)
- Type UCFC..E with pressed steel covers, closed cover (ASAHI)
- Type UCFCX (ASAHI)
- Type UCLF (ASAHI)
- Radial insert ball bearing with eccentric locking collar
- With inner ring extended on both sides
- With inner ring extended on both sides, round flanged
- With inner ring extended on both sides, massive bearing units
- With inner ring extended on both sides, with centring rim
- With inner ring extended on both sides, with centring rim, round flanged
- With inner ring extended at one side
- With inner ring extended at one side, round flanged
- With inner ring extended at one side, wide base, massive bearing units
- With inner ring extended at one side, massive bearing units, round flanged
- With inner ring extended at one side, stainless steel
- With inner ring extended at one side, stainless steel, inch size
- With inner ring extended at one side, with centring rim, round flanged
- Centring spigot, type RMEO (INA)
- Centring spigot, type TFE (INA)
- Centring spigot, type TME (INA)
- Type FY..FM (SKF), inch
- Type FY..WF (SKF), inch
- Type PCF (INA)
- Type PCJ (INA), coated with CORROTECT
- Type RCJ (INA), for high temperatures (+250)
- Type RCJ (INA), coated with CORROTECT
- Type RCJO (INA)
- Type TCJ (INA)
- Type UDF (ASAHI)
- Type UDFC (ASAHI)
- Double row angular contact ball bearing
- Type PCCJ (INA)
-
Linear motion systems
- Сross reference, interchange tables
- DIAMOND CASE linear guide systems
- HIWIN linear guide systems
- KOYO SDE/SDB linear guide systems
- NB linear guide systems
- PBC linear guide systems
- PTI linear guide systems
- ROCKFORD linear motion
- THOMSON linear guide systems
- test
- Shaft guidance systems
- Linear bushing, case unit
- Close type
- Double-wide block type
- Type AK..W, compact (NB)
- Type SMA ..W
- Corrosion resistance (NB)
- Standart (NB)
- Type TKA..W (NB)
- Block type
- Type AK, compact (NB)
- Type SMA
- Corrosion resistance (NB)
- Standart (NB)
- Type SWA, inch size
- Corrosion resistance (NB)
- Standart (NB)
- Clearance adjustable type
- Type SMJ
- Corrosion resistance (NB)
- Standart (NB)
- Type SWJ, inch size
- Corrosion resistance (NB)
- Standart (NB)
- Open type
- Double-wide block type
- Type SME..W
- Corrosion resistance (NB)
- Standart (NB)
- Block type
- Type CE
- Corrosion resistance (NB)
- Standart (NB)
- Type SME
- Corrosion resistance (NB)
- Standart (NB)
- Type SWD, inch size
- Corrosion resistance (NB)
- Standart (NB)
- Clearance adjustable type
- Type CD
- Corrosion resistance (NB)
- Standart (NB)
- Type SMD
- Corrosion resistance (NB)
- Standart (NB)
- Shaft supporter
- Slide guides
- Linear plain bearings
- Close type
- Type LPAR (SKF)
- Type LPBR (SKF)
- Type PAB..PP-AS, sealed on both sides, with relubrication facility (INA)
- Open type for support rail
- Type LPAT (SKF)
- Type PABO..PP-AS, sealed on both sides, with relubrication facility (INA)
- Pillow block
- Type RBW, resin, inch size (NB)
- Type SMP (NB)
- Cylindrical guideways
- INCH SIZE
- HOLLOW
- SOLID
- Linear bushing
- Compact type
- Type CLB (SAMICK)
- Type KH..PP, LK..UU, sealed on both sides
- Type LBBR, corrosion resistance, sealed on both sides (SKF)
- Type LBBR, sealed on both sides (SKF)
- With flange
- Square type
- Type KBK, European standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type LMEK, European standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type LMK, Asian standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type SMK, Asian standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type SMK..G-L (NB)
- Type SWK, American standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Square type, double length
- Type KBK..W, European standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type LMEK..L, European standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type LMK..L, Asian standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type SMK..W, Asian standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type SWK..W, American standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Square type, three length
- Type TRK, Asian standard
- Plastic cage (NB)
- Steel cage (NB)
- Circular type
- Type KBF, European standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type LMEF, European standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type LMF, Asian standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type SMF, Asian standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type SWF, American standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Circular type, double length
- Type KBF..W, European standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type LMEF..L, European standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type LMF..L, Asian standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type SMF..W, Asian standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type SWF..W, American standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Circular type, three length
- Type TRF, Asian standard
- Plastic cage (NB)
- Steel cage (NB)
- Oval type
- Type KBT, European standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type LMH, Asian standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type SMT, Asian standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type SWT, American standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Oval type, double length
- Type LMH..L, Asian standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type SMT..W, Asian standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Oval type, three length
- Type TRT (NB)
- Middle flange location
- Square type
- Type KBKC, European standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type LMEKM, European standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type LMKM, Asian standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type SMKC, Asian standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type SWKC, American standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Circular type
- Type KBFC, European standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type LMEFM, European standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type LMFM, Asian standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type SMFC, Asian standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type SWFC, American standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Oval type
- Type LMHM, Asian standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type SMTC, Asian standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Pilot flange location
- Square type
- Type LMEKP, European standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type LMKP, Asian standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type SMK..E, Asian standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type TQK..E (NB)
- Square type, double length
- Type LMEKP..L, European standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type LMKP..L, Asian standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type SMK..W..E, Asian standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type TQK..W..E (NB)
- Square type, three length
- Type TRK..E, Asian standard
- Plastic cage (NB)
- Steel cage (NB)
- Type TRKC, Asian standard
- Plastic cage (NB)
- Steel cage (NB)
- Circular type
- Type LMEFP, European standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type LMFP, Asian standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type SMF..E, Asian standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type TQF..E (NB)
- Circular type, double length
- Type LMEFP..L, European standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type LMFP..L, Asian standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type SMF..W..E, Asian standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type TQF..W..E (NB)
- Circular type, three length
- Type TRF..E, Asian standard
- Plastic cage (NB)
- Steel cage (NB)
- Type TRFC, Asian standard
- Plastic cage (NB)
- Steel cage (NB)
- Oval type
- Type LMHP, Asian standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type SMT..E, Asian standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Oval type, double length
- Type LMHP..L, Asian standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type SMT..W..E, Asian standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Self aligning
- Close type
- Type KBS..PP, machined range, sealed on both sides (INA)
- Type KBS..PP-AS, machined range, sealed on both sides, with relubrication facility (INA)
- Type KN..B-PP, light range, sealed on both sides (INA)
- Type KS..PP, heavy duty range, sealed on both sides (INA)
- Type KX..PP, heavy duty range, sealed on both sides, inch size (INA)
- Type LBCD, corrosion resistance, sealed on both sides (SKF)
- Type LBCD, sealed on both sides (SKF)
- Type LMBS, American standard (SAMICK)
- Type LMES, European standard (SAMICK)
- Type TK (NB)
- Type TK, corrosion resistance (NB)
- Type TW, corrosion resistance, inch size (NB)
- Type TW, inch size (NB)
- Open type for support rail
- Type KNO..B-PP, light range, sealed on both sides (INA)
- Type KSO..PP, heavy duty range, sealed on both sides (INA)
- Type KXO..PP, heavy duty range, sealed on both sides, inch size (INA)
- Type LBCF, corrosion resistance, sealed on both sides (SKF)
- Type LBCF, sealed on both sides (SKF)
- Type LMBS..OP, American standard (SAMICK)
- Type LMES..OP, European standard (SAMICK)
- Type TK..OP (NB)
- Type TK..OP, corrosion resistance (NB)
- Type TW..OP, corrosion resistance, inch size (NB)
- Type TW..OP, inch size (NB)
- Standard
- Close type
- Type GM (NB)
- Type GW, American standard (NB)
- Type KB, European standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type KB..PP-AS, machined range, sealed on both sides, with relubrication facility (INA)
- Type KBZ..PP, machined range, sealed on both sides, inch size (INA)
- Type LBB, inch
- Type LBB..UU, sealed on both sides, inch
- Type LBCR, corrosion resistance, sealed on both sides (SKF)
- Type LBCR, sealed on both sides (SKF)
- Type LBD
- Type LBD..UU, sealed on both sides
- Type LBE
- Type LBE..UU, KB..PP, LBCR..2LS, sealed on both sides
- Type LM, Asian standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type LM..(N) (IKO)
- Type LM..(N) F UU, stainless steel, sealed on both sides (IKO)
- Type LM..(N) F, stainless steel (IKO)
- Type LM..(N) UU, sealed on both sides (IKO)
- Type LMB..(N), inch
- Type LME, European standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type LME..(N)
- Type LME..(N) F UU, stainless steel, sealed on both sides (IKO)
- Type LME..(N) F, stainless steel (IKO)
- Type LME..(N) UU, sealed on both sides
- Type LMS, LMSL, miniature (IKO)
- Type SM, Asian standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type SM..G-L, long (NB)
- Type SW, American standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Close type, double length
- Type GM..W (NB)
- Type KB..W, European standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type LM..L, Asian standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type LME..L, European standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type SM..W, Asian standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type SW..W, American standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Open type for support rail
- Type KB..OP, European standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type KBO..PP-AS, machined range, sealed on both sides, with relubrication facility (INA)
- Type KBZ..OP-PP, machined range, sealed on both sides, inch size (INA)
- Type LBB..OP, inch
- Type LBB..UU OP, sealed on both sides, inch
- Type LBCT, corrosion resistance, sealed on both sides (SKF)
- Type LBCT, sealed on both sides (SKF)
- Type LBD..OP
- Type LBD..UU OP, sealed on both sides
- Type LBE..OP
- Type LBE..UU OP, KBO..PP, LBCT..2LS, sealed on both sides
- Type LBHT, design with extra high load carrying capacity, corrosion resistance, sealed on both sides (SKF)
- Type LBHT, design with extra high load carrying capacity, sealed on both sides (SKF)
- Type LM..(N) F OP, stainless steel (IKO)
- Type LM..(N) F UU OP, stainless steel, sealed on both sides (IKO)
- Type LM..(N) OP (IKO)
- Type LM..(N) UU OP, sealed on both sides (IKO)
- Type LM..OP, Asian standard
- Plastic cage (SAMICK)
- Type LMB..(N) OP, inch
- Type LME..(N) F OP, stainless steel (IKO)
- Type LME..(N) F UU OP, stainless steel, sealed on both sides (IKO)
- Type LME..(N) OP
- Type LME..(N) UU OP, sealed on both sides
- Type LME..OP, European standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type SM..OP, Asian standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type SW..OP, American standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Adjustable type
- Type KB..AJ, European standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type LBB..AJ, inch
- Type LBB..UU AJ, sealed on both sides, inch
- Type LBD..AJ
- Type LBD..UU AJ, sealed on both sides
- Type LBE..AJ
- Type LBE..UU AJ, sealed on both sides
- Type LM..(N) AJ (IKO)
- Type LM..(N) AJ, stainless steel (IKO)
- Type LM..(N) F UU AJ, stainless steel, sealed on both sides (IKO)
- Type LM..(N) UU AJ, sealed on both sides (IKO)
- Type LM..AJ, Asian standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type LMB..(N) AJ, inch
- Type LME..(N) AJ
- Type LME..(N) AJ, stainless steel (IKO)
- Type LME..(N) F UU AJ, stainless steel, sealed on both sides (IKO)
- Type LME..(N) UU AJ, sealed on both sides
- Type LME..AJ, European standard
- Plastic cage (SAMICK)
- Steel cage (SAMICK)
- Type SM..AJ, Asian standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
- Type SW..AJ, American standard
- Corrosion resistance, Plastic cage (NB)
- Corrosion resistance, Stainless steel cage (NB)
- Plastic cage (NB)
- Steel cage (NB)
-
Seals
- Wear sleeves
- SKF Speedi-Sleeve
- Speedi-Sleeve (SKF)
- Speedi-Sleeve Gold, for heavy industrial applications (SKF)
- Wear sleeves for heavy industrial applications
- Type LDSLV3 (SKF)
- Type LDSLV4 (SKF)
- Seals for heavy industrial applications
- With a rubber outside diameter
- With spring-loaded sealing slip
- Type HDS1K, material H-NBR/NEM (SKF)
- Type HDS2K, material FPM/FKM (SKF)
- Type HDS2K, material NBR (SKF)
- Type HDS7K, material H-NBR/NEM (SKF)
- Type HDS7K, material NBR (SKF)
- Metal-inserted seals
- With spring-loaded sealing slip
- Type SBF, material FPM/FKM (SKF)
- Type SBF, material NBR (SKF)
- Fabric reinforced rubber seal body
- With spring-loaded sealing slip
- Type HSF1, material FPM/FKM (SKF)
- Type HSF1, material NBR (SKF)
- Type HSF2, material FPM/FKM (SKF)
- Type HSF2, material NBR (SKF)
- Type HSF3, material FPM/FKM (SKF)
- Type HSF3, material NBR (SKF)
- Type HSF4, material FPM/FKM (SKF)
- Type HSF4, material NBR (SKF)
- Type HSF5, material FPM/FKM (SKF)
- Type HSF5, material NBR (SKF)
- Type HSF6, material FPM/FKM (SKF)
- Type HSF6, material NBR (SKF)
- Type HSF7, material FPM/FKM (SKF)
- Type HSF7, material NBR (SKF)
- Type HSF8, material FPM/FKM (SKF)
- Type HSF8, material NBR (SKF)
- Type HSF9, material FPM/FKM (SKF)
- Type HSF9, material NBR (SKF)
- Metal case
- Springless sealing lip
- Type HDS7, material H-NBR/NEM (SKF)
- Type HDS7, material NBR (SKF)
- Type HDS7, material X-NBR (SKF)
- With spring-loaded sealing slip
- Type HDL, material FPM/FKM (SKF)
- Type HDL, material NBR (SKF)
- Type HDS1, material FPM/FKM (SKF)
- Type HDS1, material NBR (SKF)
- Type HDS1, material X-NBR (SKF)
- Type HDS2, material FPM/FKM (SKF)
- Type HDS2, material H-NBR/NEM (SKF)
- Type HDS2, material NBR (SKF)
- Type HDS2, material X-NBR (SKF)
- Type HDS3, material FPM/FKM (SKF)
- Type HDS3, material H-NBR/NEM (SKF)
- Type HDS3, material X-NBR (SKF)
- Type HDSA1, material FPM/FKM, PTFE (SKF)
- Type HDSA1, material FPM/FKM, X-NBR (SKF)
- Type HDSA1, material NBR, X-NBR (SKF)
- Type HDSA1, material X-NBR (SKF)
- Type HDSA2, material FPM/FKM, X-NBR (SKF)
- Type HDSA2, material NBR, X-NBR (SKF)
- Type HDSA2, material X-NBR (SKF)
- Type HDSB1, material FPM/FKM, X-NBR (SKF)
- Type HDSB1, material NBR, X-NBR (SKF)
- Type HDSB2, material NBR, X-NBR (SKF)
- Type HDSD1, material FPM/FKM (SKF)
- Type HDSD1, material NBR (SKF)
- Type HDSD1, material NBR, X-NBR (SKF)
- Type HDSD2, material FPM/FKM (SKF)
- Type HDSD2, material NBR (SKF)
- Type HDSD2, material X-NBR (SKF)
- Type HDSE1, material FPM/FKM (SKF)
- Type HDSE1, material NBR (SKF)
- Type HDSE2, material FPM/FKM (SKF)
- Type HDSE2, material NBR (SKF)
- Type HDSE2, material X-NBR (SKF)
- All-rubber seals
- With spring-loaded sealing slip
- Type HS4, material FPM/FKM (SKF)
- Type HS4, material NBR (SKF)
- Type HS5, material H-NBR/NEM (SKF)
- Type HS5, material NBR (SKF)
- Type HS5, material X-NBR (SKF)
- Type HS6, material NBR (SKF)
- Type HS7, material FPM/FKM (SKF)
- Type HS7, material NBR (SKF)
- Type HS7, material X-NBR (SKF)
- Type HS8, material FPM/FKM (SKF)
- Type HS8, material H-NBR/NEM (SKF)
- Type HS8, material NBR (SKF)
- Type HS8, material X-NBR (SKF)
- Radial shaft seals
- With a rubber outside diameter
- Springless sealing lip
- Type BAOF, material 72 NBR 902 (SIMRIT)
- Type BAOFX7, material 72 NBR 902 (SIMRIT)
- Type X, material NBR (SKF)
- Type X12, material NBR (SKF)
- Type X12, material X-NBR (SKF)
- Type X13, material NBR (SKF)
- Type X15, material NBR (SKF)
- Type X15, material X-NBR (SKF)
- Type X4, material NBR (SKF)
- Type XH15, material NBR (SKF)
- With spring-loaded sealing slip
- Type BA, material 72 NBR 902 (SIMRIT)
- Type BABSL, material 72 NBR 902 (SIMRIT)
- Type BABSL, material 75 FKM 585 (SIMRIT)
- Type BABSLX7, material 72 NBR 902 (SIMRIT)
- Type BABSLX7, material 75 FKM 585 (SIMRIT)
- Type BAD, material 72 NBR 902 (SIMRIT)
- Type BAFUD, material 72 NBR 902 (SIMRIT)
- Type BAFUDSL, material 72 NBR 902 (SIMRIT)
- Type BAFUDSLX7, material 72 NBR 902 (SIMRIT)
- Type BAFUDX27, material 72 NBR 902 (SIMRIT)
- Type BAFUDX7, material 72 NBR 902 (SIMRIT)
- Type BASL, material 72 NBR 902 (SIMRIT)
- Type BAU, material 72 NBR 902 (SIMRIT)
- Type BAUM, material 75 FKM 585 (SIMRIT)
- Type BAUMSL, material 75 FKM 585 (SIMRIT)
- Type BAUMSLX27, material 75 FKM 585 (SIMRIT)
- Type BAUMSLX7, material 75 FKM 585 (SIMRIT)
- Type BAUMX27, material 75 FKM 585 (SIMRIT)
- Type BAUMX7, material 75 FKM 585 (SIMRIT)
- Type BAUSL, material 72 NBR 902 (SIMRIT)
- Type BAUSLX2, material 72 NBR 902 (SIMRIT)
- Type BAUSLX27, material 72 NBR 902 (SIMRIT)
- Type BAUSLX7, material 72 NBR 902 (SIMRIT)
- Type BAUX2, material 72 NBR 902 (SIMRIT)
- Type BAUX27, material 72 NBR 902 (SIMRIT)
- Type BAUX7, material 72 NBR 902 (SIMRIT)
- Type HMS5, material FPM/FKM (SKF)
- Type HMS5, material NBR (SKF)
- Type HMSA10, material FPM/FKM (SKF)
- Type HMSA10, material NBR (SKF)
- Type X1, material ACM (SKF)
- Type X1, material Leather (SKF)
- Type X14, material FPM/FKM (SKF)
- Type X2, material Leather (SKF)
- Metal case
- Springless sealing lip
- Type B1FOF, material 72 NBR 902 (SIMRIT)
- Type B1OF, material 72 NBR 902 (SIMRIT)
- Type HM1, material NBR (SKF)
- Type HM102, material NBR (SKF)
- Type HM11, material NBR (SKF)
- Type HM12, material NBR (SKF)
- Type HM14, material ACM (SKF)
- Type HM14, material FPM/FKM (SKF)
- Type HM14, material NBR (SKF)
- Type HM14, material X-NBR (SKF)
- Type HM18, material NBR (SKF)
- Type HM21, material FPM/FKM (SKF)
- Type HM21, material NBR (SKF)
- Type HM3, material FPM/FKM (SKF)
- Type HM3, material NBR (SKF)
- Type HM4, material NBR (SKF)
- Type HM8, material NBR (SKF)
- Type HMA1, material NBR (SKF)
- Type HMA10, material ACM (SKF)
- Type HMA10, material NBR (SKF)
- Type HMA11, material NBR (SKF)
- Type HMA14, material FPM/FKM (SKF)
- Type HMA21, material NBR (SKF)
- Type HMA22, material NBR (SKF)
- Type HMA6, material NBR (SKF)
- Type HMA76, material NBR (SKF)
- Type HMA8, material NBR (SKF)
- Type HMA85, material NBR (SKF)
- Type HMA94, material NBR (SKF)
- Type HMA96, material NBR (SKF)
- Type TL1, material NBR (SKF)
- Type TL5, material NBR (SKF)
- Type TL7, material NBR (SKF)
- Type XHM, material NBR (SKF)
- With spring-loaded sealing slip
- Type B1, material 72 NBR 902 (SIMRIT)
- Type B1D, material 72 NBR 902 (SIMRIT)
- Type B1DSL, material 72 NBR 902 (SIMRIT)
- Type B1FLDSL, material 72 NBR 902 (SIMRIT)
- Type B1FUD, material 72 NBR 902 (SIMRIT)
- Type B1FUDSL, material 72 NBR 902 (SIMRIT)
- Type B1SL, material 72 NBR 902 (SIMRIT)
- Type B1U, material 72 NBR 902 (SIMRIT)
- Type B1USL, material 72 NBR 902 (SIMRIT)
- Type B1USLX2, material 72 NBR 902 (SIMRIT)
- Type B1UX2, material 72 NBR 902 (SIMRIT)
- Type CRS1, material ACM (SKF)
- Type CRS1, material FPM/FKM (SKF)
- Type CRS1, material NBR (SKF)
- Type CRSA1, material ACM (SKF)
- Type CRSA1, material FPM/FKM (SKF)
- Type CRSA1, material FPM/FKM, NBR (SKF)
- Type CRSA1, material NBR (SKF)
- Type CRW1, material ACM (SKF)
- Type CRW1, material FPM/FKM (SKF)
- Type CRW1, material MVQ/VMQ (SKF)
- Type CRW1, material NBR (SKF)
- Type CRW1, material X-NBR (SKF)
- Type CRW5, material ACM (SKF)
- Type CRW5, material FPM/FKM (SKF)
- Type CRW5, material NBR (SKF)
- Type CRWA1, material ACM (SKF)
- Type CRWA1, material FPM/FKM (SKF)
- Type CRWA1, material MVQ/VMQ (SKF)
- Type CRWA1, material NBR (SKF)
- Type CRWA5, material FPM/FKM (SKF)
- Type CRWA5, material NBR (SKF)
- Type HDSF1, material FPM/FKM, PTFE (SKF)
- Type HDSF2, material FPM/FKM, PTFE (SKF)
- Type HDSF2, material H-NBR/NEM, PTFE (SKF)
- Type HDSF2, material NBR, PTFE (SKF)
- Type HDSF2, material X-NBR, PTFE (SKF)
- Type HDSF7, material H-NBR/NEM, PTFE (SKF)
- Type HDSH7, material H-NBR/NEM, PTFE (SKF)
- Type HDSH7, material NBR, PTFE (SKF)
- Type HDW1, material NBR (SKF)
- Type TL4, material NBR (SKF)
- Metal case and a secondary reinforcement in the side face
- Springless sealing lip
- Type B2PT, material PTFE 10 F56101 (SIMRIT)
- Type TL6, material NBR (SKF)
- Type TL6, material X-NBR (SKF)
- With spring-loaded sealing slip
- Type B2, material 72 NBR 902 (SIMRIT)
- Type B2FUD, material 72 NBR 902 (SIMRIT)
- Type B2FUDSL, material 72 NBR 902 (SIMRIT)
- Type B2SL, material 72 NBR 902 (SIMRIT)
- Type B2U, material 72 NBR 902 (SIMRIT)
- Type B2USL, material 72 NBR 902 (SIMRIT)
- Type B2USLX2, material 72 NBR 902 (SIMRIT)
- Type B2UX2, material 72 NBR 902 (SIMRIT)
- Type CRSH1, material ACM (SKF)
- Type CRSH1, material NBR (SKF)
- Type CRSHA1, material ACM (SKF)
- Type CRSHA1, material NBR (SKF)
- Type CRWH1, material ACM (SKF)
- Type CRWH1, material FPM/FKM (SKF)
- Type CRWH1, material MVQ/VMQ (SKF)
- Type CRWH1, material NBR (SKF)
- Type CRWHA1, material ACM (SKF)
- Type CRWHA1, material FPM/FKM (SKF)
- Type CRWHA1, material MVQ/VMQ (SKF)
- Type CRWHA1, material NBR (SKF)
- Type TL8, material NBR (SKF)
- Special designs
- Type MSS 7, material 72 NBR 902 (SIMRIT)
- Type MSS-1, material 72 NBR 902 (SIMRIT)
- Type MSS-1, material 75 FKM 585 (SIMRIT)
- Axial shaft seals
- V-ring seals
- Metal-cased V-ring seals
- Type MSC 01, material 80 FKM 177459 (SIMRIT)
- Type MSC 01, material 80 NBR 177458 (SIMRIT)
- Type MSC 02, material 80 FKM 177459 (SIMRIT)
- Type MSC 02, material 80 NBR 177458 (SIMRIT)
- Type MVR1 (SKF)
- Type MVR2 (SKF)
- All-rubber seals
- Type VA/VR1, material FPM/FKM (SKF)
- Type VA/VR1, material NBR (SKF)
- Type VE/VR4, material NBR (SKF)
- Type VL/VR3, material FPM/FKM (SKF)
- Type VL/VR3, material NBR (SKF)
- Type VR1, material FPM/FKM (SKF)
- Type VR1, material NBR (SKF)
- Type VR2, material FPM/FKM (SKF)
- Type VR2, material NBR (SKF)
- Type VR3, material FPM/FKM (SKF)
- Type VR3, material NBR (SKF)
- Type VR4, material NBR (SKF)
- Type VR6, material NBR (SKF)
- Type VRME/VR6, material NBR (SKF)
- Type VS/VR2, material FPM/FKM (SKF)
- Type VS/VR2, material NBR (SKF)
- Metal face seals
- Type HDDF, material FPM/FKM (SKF)
- Type HDDF, material NBR (SKF)
- Axial clamp seals
- Type CT1, material NBR (SKF)
- Type CT4, material NBR (SKF)
- Track pin seals
- Type TP (SKF)
- Type TPM (SKF)
-
Belts
- Classical timing belts
- Twoway
- HiTD
- Section D-14M (SKF)
- Section D-5M (SKF)
- Section D-8M (SKF)
- Super Torque
- Section DS5M (SKF)
- Section DS8M (SKF)
- Classical
- Section D-H (SKF)
- Section D-L (SKF)
- Section D-XL (SKF)
- Metric
- Section D-T10 (SKF)
- Section D-T20 (SKF)
- Section D-T5 (SKF)
- Oneway
- HiTD
- Section 14M (SKF)
- Section 3M (SKF)
- Section 5M (SKF)
- Section 8M (SKF)
- Super Torque
- Section S14M (SKF)
- Section S2M (SKF)
- Section S3M (SKF)
- Section S4,5M (SKF)
- Section S5M (SKF)
- Section S8M (SKF)
- Classical
- Section H (SKF)
- Section L (SKF)
- Section MXL (SKF)
- Section XH (SKF)
- Section XL (SKF)
- Section XXH (SKF)
- Metric
- Section AT10 (SKF)
- Section AT20 (SKF)
- Section AT5 (SKF)
- Section T10 (SKF)
- Section T2.5 (SKF)
- Section T20 (SKF)
- Section T5 (SKF)
- V- belts
- Variable speed belts
- Section VS (SKF)
- Classical
- Wrapped
- Section 10/Z (SKF)
- Section 13/A (SKF)
- Section 17/B (SKF)
- Section 22/C (SKF)
- Section 32/D (SKF)
- Section 38/E (SKF)
- Cogged raw edge
- Section X10/ZX (SKF)
- Section X13/AX (SKF)
- Section X17/BX (SKF)
- Section X22/CX (SKF)
- Banded belts
- Classical
- Section 13/A (SKF)
- Section 17/B (SKF)
- Section 22/C (SKF)
- Section 32/D (SKF)
- Standart ANSI (USA)
- Section SPA (SKF)
- Section SPB (SKF)
- Section SPC (SKF)
- Narrow standart ANSI (USA)
- Section 3V/9J (SKF)
- Section 5V/15J (SKF)
- Section 8V/25J (SKF)
- Narrow
- SKF Xtra Power wrapped wedge belts
- Section SPA XP (SKF)
- Section SPB XP (SKF)
- Section SPC XP (SKF)
- Section SPZ XP (SKF)
- SKF Xtra Power wrapped narrow wedge belts ANSI (USA)
- Section 3V XP (SKF)
- Section 5V XP (SKF)
- Section 8V XP (SKF)
- Wrapped
- Section SPA (SKF)
- Section SPB (SKF)
- Section SPC (SKF)
- Section SPZ (SKF)
- Cogged raw edge
- Section XPA (SKF)
- Section XPB (SKF)
- Section XPC (SKF)
- Section XPZ (SKF)
- Cogged standart ANSI (USA)
- Section 3VX/9NX (SKF)
- Section 5VX/15NX (SKF)
- Standart ANSI (USA)
- Section 3V/9N (SKF)
- Section 5V/15N (SKF)
- Section 8V/25N (SKF)
- Special belts
- Flat belts
- Ribbed belts
- Section PH (SKF)
- Section PJ (SKF)
- Section PK (SKF)
- Section PL (SKF)
- Section PM (SKF)
- Hex belts
- Section AA/HAA (SKF)
- Section BB/HBB (SKF)
- Section CC/HCC (SKF)
-
Chains
- Lift chain
- Leaf chain
- Standard ANSI (SKF)
- Standard BS/ISO (SKF)
- Conveyor chain
- Double pitch, roller (SKF)
- Double pitch, large roller (SKF)
- Special roller type
- Attachments A-1/A-2/ K-1/K-2 (SKF)
- Attachments AA-1/AA-2/ KK-1/KK-2 (SKF)
- Attachments SA-1/SA-2/ SK-1/SK-2 (SKF)
- Type M, with bush (SKF)
- Type M, roller (SKF)
- Type M, large roller (SKF)
- Type M, flanged roller (SKF)
- Conveyor chains for special use
- Lumber mill series
- SKF
- Series 3939 (SKF)
- Silent chains
- With the contact on the side of sprocket's tooth (SKF)
- With the contact on the surface of the sprocket's groove (SKF)
- Drive roller chain
- Double pitch chain conveyor series
- SKF
- Rotary
- SKF
- Stainless steel
- SKF
- Corrosion resistant
- Dacromet (SKF)
- Nickelized (SKF)
- Galvanized (SKF)
- Straight plate
- Series A/B (SKF)
- Self lube
- SKF
- Standard type
- Standard ANSI (SKF)
- Standard BS/ISO (SKF)
- Heavy duty
- Strength chains SKF XTRA, TYPE H/ SH/ SPH/ SHH, standard ANSI (SKF)
- Drive roller chains special constructions
- For oil field
- SKF
- With special elements
- Double pitch chain attachments K-1/SK-1 (SKF)
-
Sprockets
- Double for single row chains
- Pilot bore
- Standard ANSI (SKF)
- Standard BS/ISO (SKF)
- Taper bushed
- Standard ANSI (SKF)
- Standard BS/ISO (SKF)
- Double simplex
- Pilot bore without hub
- Standard ANSI (SKF)
- Pilot bore, hub on two side
- Standard ANSI (SKF)
- Standard BS/ISO (SKF)
- Pilot bore, hub on one side
- Standard ANSI (SKF)
- Standard BS/ISO (SKF)
- Taper bushed without hub
- Standard ANSI (SKF)
- Standard BS/ISO (SKF)
- Taper bushed, hub on two side
- Standard ANSI (SKF)
- Standard ANSI, type C1 (SKF)
- Standard BS/ISO (SKF)
- Taper bushed, hub on one side
- Standard ANSI (SKF)
- Standard BS/ISO (SKF)
- Simplex
- Roller chain idler sprocket units
- Sprocket made from polyamide, type KSR..-L0..-22 (INA)
- Sprocket made from steel or sintered iron, type KSR..-BO (INA)
- Sprocket made from steel or sintered iron, type KSR..-LO (INA)
- Bored-to-size
- Standard BS/ISO (SKF)
- Pilot bore without hub
- Standard ANSI (SKF)
- Standard BS/ISO (SKF)
- Pilot bore, hub on two side
- Standard ANSI (SKF)
- Standard BS/ISO (SKF)
- Pilot bore, hub on one side
- Standard ANSI (SKF)
- Standard BS/ISO (SKF)
- Taper bushed, hub on two side
- Standard ANSI (SKF)
- Standard BS/ISO (SKF)
- Taper bushed, hub on one side
- Standard ANSI (SKF)
- Standard BS/ISO (SKF)
- Triplex
- Pilot bore, hub on two side
- Standard ANSI (SKF)
- Standard BS/ISO (SKF)
- Pilot bore, hub on one side
- Standard ANSI (SKF)
- Standard BS/ISO (SKF)
- Taper bushed without hub
- Standard BS/ISO (SKF)
- Taper bushed, hub on two side
- Standard BS/ISO (SKF)
- Taper bushed, hub on one side
- Standard BS/ISO (SKF)
